Jump to content
SAU Community

Recommended Posts

Hi guys,

As you may know from other threads i am looking to get some 18" starcorp Impuls rims with falken 451/2 tyres. Two people recently have brought up the fact i will have wider rear tyres and say this is not a good idea and will create alot of understeer.... where as i thought it would give me better grip? Especially with decent tyres...?

I know the rims arent the best quality, but its just a street car, not for racing. I dont see why they wouldnt be adequat as others on here have them and say they are ok.

Link to comment
https://www.sau.com.au/forums/topic/123752-wider-rear-tyres/
Share on other sites

I have those wheels and wider rubber at the back (235 vs 265's). Understeer is only a problem if you have stock suspension and take a poor line into a corner. Skylines are a heavy car and don't like to dive into corners in the same fashion as a lighter car would, a smoother trajectory (more like slow in fast out) and better suspension will help. I have the height adjustable bilstiens from the group buy, they did wonders, now for some sway bars :rofl:.

Well im not going to be a hero racing it on a track, so i think grip is more important than a little bit of understeer which shouldnt be too relevent for normal driving. Not like im gonna go thrashing around corners.

If you're not planning on being a hero on the track, understeer is a good thing. Understeer is safer than oversteer for a novice to middling driver, which is why practically every OEM tunes their cars to understeer when approaching the limit.

I noticed from your other threads that you're going for looks after some kind of major performance benefit, and cars with massive rear tyres always look hot. So don't worry about it. As long as your fronts aren't too narrow, in your case its not a major problem to have a wider rear.

I've gone from a staggered tyre size to the same all-round, but then I do like thrashing it around corners. :(

(and, as an aside, when my current street tyres wear out I'll be returning to a staggered size for the phat looks, yo)

I had noticed more understeer when I went to a staggered set of rims (8inch front 9inch rear) but this was only when pushing it very hard on motokhana style events with really tight corners (R33 GTSt's do understeer horrribly in these kind of events)... for everyday driving you won't notice it

BTW adjustable swaybars helped me tune out the understeer simply by tightening the rear a couple of notches... so I have the added grip in a straight line that wider tires will give plus its not pushing like a smack dealer anymore!

I'm with Nick, R33's in general dislike tight corners where sudden changes of direction induces nose diving. This can be tuned out but it is far easier to deal with understeer as opposed to massive oversteer, which while fun, easily gets out of hand much faster. You can get super duper suspension setup and sway bars etc to deal with it, but you've said on numerous occassions that you want a compliant ride which means that your suspension mods will be a bit tamer and as such you'll get a little understeer. I came from a FWD car so it's natural for me to deal with, go have a trash late at night on a deserted section of road to get a feel for it if you're uncertain.

Also, in the time you've spent posting here and PM'ing me, you could've tested all this for yourself :( Just buy the damn wheels and post pics!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...