Jump to content
SAU Community

Recommended Posts

hey just bring up the thread again. got my third yellow within having my car for over a year and a half. got it for my wing. but my question is, are the cops alloud to kick your car and shove a torch in your pod filter and yank it around to see if it is secured??

Damn that's harsh. I carry a happy snap camera (with video function) with me at all times just in case cops / general public arent' going to be friendly. The other week I took pics of some dude bashing up his girlfriend in the middle of the day in Midland. However cops didn't do much, as apparently half an hour before he did a stand still in the middle of the street venting out some anger (almost running over a cop in the process) after going to a domestic violence therapy session minutes before hand :S Only in Midland hahahaha.

Another question for those that know: Is exhaust size a road worthy issue (eg. 3.5") or just the noise it produces? Is this the same case for BOV also?

It's the noise it produces... and BOV's arent illegal coz of the noise.. I think it's because it releases gas into the atmosphere without being cleaned thru the cat/exaust :rolleyes: (and noise a bit i guess)

Let me know if I'm wrong :)

but my question is, are the cops alloud to kick your car and shove a torch in your pod filter and yank it around to see if it is secured??

I'm sure your definition of "kick" would somewhat differ from thiers if you took it to court :P

Yep, how else are they sposed to tell if your pod filters secured? Something only abuse can find out eh!

MattyP -its the noise, I got 3.5" on mine and it's pretty quiet eh :P

It’s the noise and the gas emissions. The environmental pollution is enforced by the EPA and apparently can lead to some serious fines if caught by this body. The noise is similar to the exhaust; they see it as a disturbance and possible cause of distraction to other drivers.

Probably the main things performance cars get pulled over and yellowed for are...

1. Noise (exhaust, BOV)

2. Smokey exhausts

3. Ride height

Failing those they will look for

1. Rims/tyres too large

2. Gauges above eye level

3. Unsecured Pod's

4. Stiff suspension

And I have heard (but not confirmed) that you can get busted for the following too..

4. Aftermarket ECU's?

5. High mount turbos?

Just adding to this thread, I got my first yellow sticker on Tuesday afternoon :) 3 defects written on the defect is for the bov to not make noise, checking the fmic install to see whats been cut (I guess) & the front tyres, even though they are only a few months old & have plenty of tread, just the outside edges have a bit of wear on them. He managed to miss the high mount & all the shiny bits, somehow ;)

But my question is what are my chances of getting a highly modded car with no permits over the pits, especially first time? My bov is welded to a cooler pipe so don't know how to get around that, my diff I believe is welded so is quite noisy (suprised he didnt add that to the list, because I had to turn around into a side street while he wrote it up & he heard it & was like "What the hell was that smashing sound?" haha.

Everything else should be ok, but the thing is, it's looking like the earliest physical chance to take the car to the pits is the day before the defect expires. With work I won't have a chance during the day to get there in between, but if I didn't happen to pass it first time would they be able to extend it for say another week?

not always..

why would they issue you a sticker for the first (usually) 2 weeks, if they are going to extend it another 2 weeks just like that?

the whole reason you get a sticker is that they have reason to suspect your car is unroadworthy, so thry give you 2 weeks to either a) prove that it isnt, or b) get it fixed/off the road, they wont just extend it because you cant get there within 2 weeks.

if it happens that you miss the date, or you don't get an extension, then you need to ring up and get a permit ($15 for a 48 hour permit) to take the car to either a place of repair/work, or the pits themselves.

ps. do you have an external gate or anything? what about rim/tyre widths, are they the same?

I've got an external gate, tyres aren't the same but are just outside the allowed changed limit I think (235/45 front, 255/40 rear), but not really worried about the rims or tyres because I can just put on some stockies for the day if need be.

not always..

why would they issue you a sticker for the first (usually) 2 weeks, if they are going to extend it another 2 weeks just like that?

the whole reason you get a sticker is that they have reason to suspect your car is unroadworthy, so thry give you 2 weeks to either a) prove that it isnt, or b) get it fixed/off the road, they wont just extend it because you cant get there within 2 weeks.

if it happens that you miss the date, or you don't get an extension, then you need to ring up and get a permit ($15 for a 48 hour permit) to take the car to either a place of repair/work, or the pits themselves.

ps. do you have an external gate or anything? what about rim/tyre widths, are they the same?

what i meant is if they fail you on the first pass they give you another sticker to allow 2 weeks to fix the problems

(person i know got a yellow for cracked windscreen and oily engine - the pits passed glass, but failed the oily engine again and then added leaky shocks, tyres and something else - new sticker gave her 2 weeks to fix the new problems)

ossie, if you can only make it to the pits the day before the yellow expires. Just try to change as much as you can that you think will help, if you don't pass you can get it extend for i think its 2weeks but it cost you like $70 or something like that.

the only thing i can think of with your bov, is can u remove it and just place a metal section over the hole. or is the bov complete welded to the pipe with no part that can be removed?

what i meant is if they fail you on the first pass they give you another sticker to allow 2 weeks to fix the problems

(person i know got a yellow for cracked windscreen and oily engine - the pits passed glass, but failed the oily engine again and then added leaky shocks, tyres and something else - new sticker gave her 2 weeks to fix the new problems)

<repeat my first post here>

again, it doesnt matter if you fix as much as possible, but still fail, they don't always extend the sticker. (and you can't "buy" yellow stickers like michael said either)

PS: external gate == you're f**ked. :)

as mike said just fix as much as u can and hope the inspector guy is blind :bunny: hehe but i alwasy thought yellow stickers were 2 months cause when i had a yellow they gave me 2 months :) then i went through to the pits and got defected for my teins supposedly their too hard then got another 3 weeks then yeah i danno how things work these days ;)

Cheers

Chi

again, it doesnt matter if you fix as much as possible, but still fail, they don't always extend the sticker. (and you can't "buy" yellow stickers like michael said either)

sorry what i ment to say is if you fail the 1st time and they give you an extension you are required to pay a fee when you go back to get the yellow off, or so i;ve been informed.

Also ossie just try to fix up as much as you can, im sure if you show them you made an effort then they wont have a problem extending the yellow for a few more week. also turn your boost down or off and try putting a metal plate between the gate and the manifold JUST for the pits so that they wont be able to get the gate to vent so it shouldnt be a problem

Yeah I'll be talking to the workshop about it, because they deal with the pits a lot & will know what's best to change on my car as well. With an external gate I've also been told I could just set the rev limiter to 4k & say the engine is being run in, but is that so they can't hear the sound of it? Sounds so beautiful :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...