Jump to content
SAU Community

Recommended Posts

Not all the time But When taking off in 1st or 2nd I hear a grinding noise coming from the passenger side of the engine Not sure what it is, But I know it should be there

When I turn the car on I hear like a funny knocking sound from behind the radio?? Very weird sounds like morse code.

Also Stupid question but how do u turn on and off the fog lights?

Whats the best way to brighten up the dash?? i can hardly see my revs and speedo at nite time, my old dash in the silvia was very good.

Think thats about all other then that its a 1994 R33 s1 RB25DET with about 980000 on the clock.

Edited by faz
Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/
Share on other sites

That "knocking" behind the radio sounds like a common fault in 33's which has to do with the aircon unit, do a search and it will surely come up with some results. To fix it, you need a $60 odd part and a bit of patience but it is doable

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2291818
Share on other sites

If you mean clickign by knocking, it's a very common problem and apparently its a plastic cog thats had some gears sheered of it. Also i've herd to much effort to go to for fixing.

And yeah my s1 doesn't have foggies (driving lights) theres room to put them in but you will have to run wireing as i'm pritty sure there isnt' any.

Michael

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2291986
Share on other sites

Re: dash lights not bright enough

I apologise if I'm stating the obvious, but R33s have a dimmer switch fitted during compliance. This means the dimmer could be hiding anywhere - have you found it and made sure it is on max?

If you have, it's fairly straightforward to remove the dash and swap the bulbs over. Most guys ditch the 3.4W stock bulbs and use 5W instead. With the dimmer in the R33s you can't go wrong. :laugh:

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2292724
Share on other sites

yeah dash lights should have a dimmer switch/dial... most likely just to the right of the steering column. On some cars turning it down makes it brighter.

Foggies were an option. Some S1 have globes in em, Some don't. If you have them from factory you should have another dial right alongside your headlight dial. I dunno the technical terms :)

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2292926
Share on other sites

yeah dash lights should have a dimmer switch/dial... most likely just to the right of the steering column. On some cars turning it down makes it brighter.

Foggies were an option. Some S1 have globes in em, Some don't. If you have them from factory you should have another dial right alongside your headlight dial. I dunno the technical terms :whistling:

Are you talking about the lights next to the indicators on the frontbar? My ones turn on but they're not bright enough to be foggies, I've always assumed they were extra parking lights as the ones in the headlight aren't that effective

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2300868
Share on other sites

OK... series 2 SHOULD have a dimmer installed. It was required for compliance. My car has been in Australia for more than 6 years, and it has it. (funky 80's amplifier dial!)

And yes, the lights next to your indicators are your DRIVING LIGHTS... they're not called fog-lights anymore. Europeans have fog lights for... fog! And they'd be a bright yellow. Ours are just white and only light up the road immediately infront of you, and more out to the sides.

Driving lights and fog lights are weak to drive with, sure, but they are quite bright to oncoming traffic. They are supposed to be used like headlights. i.e: not in suburbian areas, and not with cars infront of you or oncoming.

Series 1's might be dimmer than series 2 though... for those s1 owners that have them.

Noone has mentioned the grinding yet, so i'll take a stab at that one. Check your engine mount on that side. If not that, check your bushes or have pedders or something check them for you. =-]

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2300950
Share on other sites

And yes, the lights next to your indicators are your DRIVING LIGHTS... they're not called fog-lights anymore. Europeans have fog lights for... fog! And they'd be a bright yellow. Ours are just white and only light up the road immediately infront of you, and more out to the sides.

I wonder what the Road Traffic Act says about driving lights. From memory, the $70 fine was for using fog lights - I had a mate argue his way out of a fine when he produced the owner's manual that called them driving lights.

:)

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2301325
Share on other sites

OK... series 2 SHOULD have a dimmer installed. It was required for compliance. My car has been in Australia for more than 6 years, and it has it. (funky 80's amplifier dial!)

And yes, the lights next to your indicators are your DRIVING LIGHTS... they're not called fog-lights anymore. Europeans have fog lights for... fog! And they'd be a bright yellow. Ours are just white and only light up the road immediately infront of you, and more out to the sides.

Driving lights and fog lights are weak to drive with, sure, but they are quite bright to oncoming traffic. They are supposed to be used like headlights. i.e: not in suburbian areas, and not with cars infront of you or oncoming.

Series 1's might be dimmer than series 2 though... for those s1 owners that have them.

Noone has mentioned the grinding yet, so i'll take a stab at that one. Check your engine mount on that side. If not that, check your bushes or have pedders or something check them for you. =-]

when i didn't know which places were good, i tried pedders.They knew less about skylines than the japs know about common-bogan-dores

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2301875
Share on other sites

tink its another one of those some have and some dont parts. i got them on my s1 coupe, had to take to them with a saw to fit in my cooler but still work. and i have had a aftermarket dimmer switch fitted and also the park lights next to the head light were fitted for compliancing. looks like they were drilled out with a hole saw and lights fitted.

Link to comment
https://www.sau.com.au/forums/topic/124115-just-got-my-r33/#findComment-2308386
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...