Jump to content
SAU Community

Recommended Posts

Chrome and Skylines don't mix...

But if you HAVE to, then go the race-style chrome.

Even better, get a polished wheel - shine without the added weight that chroming adds.

i have 20 x 8.5" wheels on my R33 GTS25t

front and rear guards have been rolled, tyres are 225/30/zr20

guards sit just on the rim, front and rear with only minimal rubbing at the front on hard lock.

Basically, 20s are so big, that it's almost impossible to keep the rolling diametre the same (on a skyline anyways).

19s are still really massive, if you really must go for big wheels.

Run it in a tyre calculator, but i have never seen any profile less than 30.

so your telling me my stupid 17 inch volk racing wheels r better

First of all work out what you want to achieve, looks (like I said chrome on sports are is bad, good for 4WD like in America) or power. If you have a massive FMIC and upped boost and 20 inch chromies... wtf are you trying to achieve? Its like a sprinter having a cigarette before a run...

If you want a nice modded car with nice wheels then get some smaller 18 wheels that are light weight... Im not asking you to get the super light type but something that doesnt weigh a tone... youll be amazed how slower sports cars go with 20 inch rims, esp chrome.

Make up your mind with the following pics:

Clearly chromes are suited for the 4WD!

post-23785-1152025997.jpg

post-23785-1152026026.jpg

post-23785-1152026037.jpg

Edited by Sir-D

Hell yea, gimme your volks :thumbsup:

Chrome is bad, but shadow chrome etc, the other forms that look fitting are nice...

There's a guy up the road from me with chromies on his monaro.. The entire rim is chrome lol, looks like a massive silver dinner plate.. it's ugly.

Don't put chrome near your car... unless its shadowcrome etc etc

And yea, 20's 19's even 18's are going to compromise your car's drivability and handling if not properly set up with the appropriate suspension...

... Dn't get chrome :

Massive chrome on skylines dont mix in my opinion, dont get me started on those vaults ones ahaha. Not only does huge chrome rims adds more weight to the car it also kills the comfort factor and tyres will burn a deep hole in your wallet. I rekon 17 18s light weight Jap rims are the way to go, suits the car more.

But hey if 20inch chormies float your boat Mario then go for it, its your car man in the end your customizing it to your liking not for others.

Edited by JUNR34
  • 10 months later...
I am Getting gianelle deep chrome dish jet black 10 spoke 20s i seen an r33 with the black car black wheels with chrome dish looks sexy...how often will i hav to change tires ?

that all depends on alignment, and how stupid you are with the car.

not often if you dont do burnouts and drift. if you do... you better have deep pockets :(

At the end of the day its your car and you should modify it to your tastes not others.. if your intending to do SHOW then by all means go 20", but if its for a street car go 18".

and tyre prices between 19" and 20" isn't much different either, so if you can afford the initial cost may as well go 20". You will need 30 series on the front and if you like 35 on rear.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...