Jump to content
SAU Community

My R33 S2 Has 2 Badges!?!?

thorpe84
 Share

Recommended Posts

thorpe84 Proficient

thorpe84

Posted
Posted

ok here is a pic of the front of my car, it looks really bad with 2 badges and i have no idea why they would be put on there in the first place

the car was imported from japan so im guess its another japenese way of logic or maybe my care was put together from spare parts, either way who really cares!

how the hell do i take the chrome one off the bonnet? can i do it myself? if not where should i take it and how much would it cost to get it taken off properly?

i dont want to phuck up the duco

i cant take the red one off the grill because if i do there will still be the "mark" where the badge should have been.

any help would be great for this very strange problem of mine

post-30005-1152602837.jpg

Link to comment
https://www.sau.com.au/forums/topic/125705-my-r33-s2-has-2-badges/
Share on other sites
Modena Grand Master

Modena

Posted
Posted
ok here is a pic of the front of my car, it looks really bad with 2 badges and i have no idea why they would be put on there in the first place

the car was imported from japan so im guess its another japenese way of logic or maybe my care was put together from spare parts, either way who really cares!

how the hell do i take the chrome one off the bonnet? can i do it myself? if not where should i take it and how much would it cost to get it taken off properly?

i dont want to phuck up the duco

i cant take the red one off the grill because if i do there will still be the "mark" where the badge should have been.

any help would be great for this very strange problem of mine

Ur S2 has a wierd grill... check out mine...

post-23785-1152603539.jpg

thorpe84 Proficient

thorpe84

Posted
  • Author
Posted
Ur S2 has a wierd grill... check out mine...

i know mine is really strange its like a black mesh grill? i havent seen any others like it anywhere!

i actualy dont mind the look of it to be honest.

it would look alot better if there wernt 2 badges.

post-30005-1152604325.jpg

wilch Grand Master

wilch

Posted
Posted

There are no holes...

Use a hair dryer... heat it up a little bit... and pry the thing off. It takes time.

Afterwards use a bit of methylated spirits on a rag to clean all the gooey gunk off the paint, then polish her up a little bit with some polish.

Easy as.

crw_0940.jpg

thorpe84 Proficient

thorpe84

Posted
  • Author
Posted
I have the same black grill on my White S2 33, I reckon it looks heaps better. Loose the chromie!!!!

wow thats a first or should i say second i agree with you it looks quite nice

as for it being a series 1 well i cant say i have seen it on a series 1 most s1 grills i have seen have either the lines/fin things or they have had the whole thing removed, the series 1 didnt have a chrome badge on the bonnet?

BINGO!!! s1 95 model http://www.sportsandprestigeimports.com/45492.jpg

PWND Grand Master

PWND

Posted
Posted
There are no holes...

Use a hair dryer... heat it up a little bit... and pry the thing off. It takes time.

Afterwards use a bit of methylated spirits on a rag to clean all the gooey gunk off the paint, then polish her up a little bit with some polish.

Easy as.

crw_0940.jpg

What front bar is this? GTR?

I am looking to change the front on my s2 as it's got a couple of cracks, and i love the look of this one, but am unsure what it is.

Wink Grand Master

Wink

Posted
Posted
What front bar is this? GTR?

I am looking to change the front on my s2 as it's got a couple of cracks, and i love the look of this one, but am unsure what it is.

Yes that's a GTR bar.

And yes series 2 came out with 2 grilles one colour coded low style grille (the common one) and one straight black with badge.

SAMFISHER Enthusiast

SAMFISHER

Posted
Posted

Yep, Factory Option for series 2's

The standard body colour grills have the emblem on the bonnet

The balck optional grills have no emblem on the bonnet.

Your car will have had the optional grill fitted at a later date hence the two emblems.

R33silverS2 Mentor

R33silverS2

Posted
Posted

The Black grill is an aftermarket product sold in japan that can be bought for s1's or s2's. The chrome badge is the standard s2 badge which all s2's have from factory. So the chrome badge was never added to your car, the red one was.

Fry_33 Proficient

Fry_33

Posted
Posted

I am fairly sure that all series 2's had the chrome bonnet S standard. The grille is an option, It should be available from Nissan, be expected to pay $500 plus for it new, could be closer to $1000 from memory actually. My mates S2 was badged by some maggots and they took the Red S off this grille and he couldn't replace it as the grille is technically one piece.

There is a very similar Series 1 grille but the lower corners are rounded which suits the Series 1 lights better.

The grille can be removed and the plastec part painted, as far as I know they are all grey, so they can be colour coded.

The Grille is metal that's been plastic dipped and on a lot of them that I have seen the plastic is flaking off. I have just used the angle grinder with a wire brush attached to remove the black plastic. I will now get it sand blasted and powdercoated which will stand up to stone chips etc much better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...