Jump to content
SAU Community

Recommended Posts

ok here is a pic of the front of my car, it looks really bad with 2 badges and i have no idea why they would be put on there in the first place

the car was imported from japan so im guess its another japenese way of logic or maybe my care was put together from spare parts, either way who really cares!

how the hell do i take the chrome one off the bonnet? can i do it myself? if not where should i take it and how much would it cost to get it taken off properly?

i dont want to phuck up the duco

i cant take the red one off the grill because if i do there will still be the "mark" where the badge should have been.

any help would be great for this very strange problem of mine

post-30005-1152602837.jpg

Link to comment
https://www.sau.com.au/forums/topic/125705-my-r33-s2-has-2-badges/
Share on other sites

ok here is a pic of the front of my car, it looks really bad with 2 badges and i have no idea why they would be put on there in the first place

the car was imported from japan so im guess its another japenese way of logic or maybe my care was put together from spare parts, either way who really cares!

how the hell do i take the chrome one off the bonnet? can i do it myself? if not where should i take it and how much would it cost to get it taken off properly?

i dont want to phuck up the duco

i cant take the red one off the grill because if i do there will still be the "mark" where the badge should have been.

any help would be great for this very strange problem of mine

Ur S2 has a wierd grill... check out mine...

post-23785-1152603539.jpg

Ur S2 has a wierd grill... check out mine...

i know mine is really strange its like a black mesh grill? i havent seen any others like it anywhere!

i actualy dont mind the look of it to be honest.

it would look alot better if there wernt 2 badges.

post-30005-1152604325.jpg

There are no holes...

Use a hair dryer... heat it up a little bit... and pry the thing off. It takes time.

Afterwards use a bit of methylated spirits on a rag to clean all the gooey gunk off the paint, then polish her up a little bit with some polish.

Easy as.

crw_0940.jpg

I have the same black grill on my White S2 33, I reckon it looks heaps better. Loose the chromie!!!!

wow thats a first or should i say second i agree with you it looks quite nice

as for it being a series 1 well i cant say i have seen it on a series 1 most s1 grills i have seen have either the lines/fin things or they have had the whole thing removed, the series 1 didnt have a chrome badge on the bonnet?

BINGO!!! s1 95 model http://www.sportsandprestigeimports.com/45492.jpg

There are no holes...

Use a hair dryer... heat it up a little bit... and pry the thing off. It takes time.

Afterwards use a bit of methylated spirits on a rag to clean all the gooey gunk off the paint, then polish her up a little bit with some polish.

Easy as.

crw_0940.jpg

What front bar is this? GTR?

I am looking to change the front on my s2 as it's got a couple of cracks, and i love the look of this one, but am unsure what it is.

What front bar is this? GTR?

I am looking to change the front on my s2 as it's got a couple of cracks, and i love the look of this one, but am unsure what it is.

Yes that's a GTR bar.

And yes series 2 came out with 2 grilles one colour coded low style grille (the common one) and one straight black with badge.

Yep, Factory Option for series 2's

The standard body colour grills have the emblem on the bonnet

The balck optional grills have no emblem on the bonnet.

Your car will have had the optional grill fitted at a later date hence the two emblems.

The Black grill is an aftermarket product sold in japan that can be bought for s1's or s2's. The chrome badge is the standard s2 badge which all s2's have from factory. So the chrome badge was never added to your car, the red one was.

I am fairly sure that all series 2's had the chrome bonnet S standard. The grille is an option, It should be available from Nissan, be expected to pay $500 plus for it new, could be closer to $1000 from memory actually. My mates S2 was badged by some maggots and they took the Red S off this grille and he couldn't replace it as the grille is technically one piece.

There is a very similar Series 1 grille but the lower corners are rounded which suits the Series 1 lights better.

The grille can be removed and the plastec part painted, as far as I know they are all grey, so they can be colour coded.

The Grille is metal that's been plastic dipped and on a lot of them that I have seen the plastic is flaking off. I have just used the angle grinder with a wire brush attached to remove the black plastic. I will now get it sand blasted and powdercoated which will stand up to stone chips etc much better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...