Jump to content
SAU Community

Recommended Posts

hey all, purchased an r32 gtr last night through prestige and have been told due to new car shipments it could miss the boat coming into perth and take up to 4 months, so it has been sudjested to go to sydney and have it complied then bring it back via road train, just wondering if anyone else importing into perth has heard anything like this, and lastly what are some decent compliance workshops in perth

http://www.prestigemotorsport.com.au/modul...hp?StockID=4041

Edited by Jolinator

Well, I can see where you made your first mistake.

Anyway, you need to ask Geoff what compliance shops there are in WA, or look it up on the DOTARS site. From what I understand this needs to be sorted BEFORE you ship the car.

I have heard of this being done. It is not uncommon for shops to effectively sell compliance to each other. Some GT-R's in WA have been complied over east because of a shortage of availability over here. It is ok to do it this way, but there are some key questions you need to ask:

Who is the shop?

How much are they charging for compliance?

How are you going to arrange rego?

Who is paying for the freight across from Vic/NSW?

What about the non standard gear - ie how are you going to get that?

Good luck with it & make sure your broker looks after you.

Edited by djr81

nice car. it's a mark hocking car. and from the looks of it inspected at prime garage. I met the owner of prime garage earlier this year in tokyo and he is a lovely guy very helpful. I'd suggest you wont have any problems with it as it looks very tidy and mark only buys good cars. It's a shame you couldn't have got it directly from mark but not to worry, it's no biggie.

as djr81 suggested you will need to look at the DOTARS site to get an idea of who has SEVS compliance around australia.

djr81 by first mistake, do you mean going through prestige? i found them to be the best, geoff has always been extremly helpfull and went out of his way for many months for me when i wasnt even a customer, unlike j spec who didnt reply emails and when they do its so late the car has been sold, so im quite happy through i went through. however im extremly new to importing so if there is something im missing?

beer baron, when i saw the name mark hocking on the invoice it actually worried me as that name rang a bell , i swear i herd that name mentioned as a bad trader someware, maybe not, its good to hear that.

i have put a deposit on the car until the 20th, so i still have a bit of time up my sleave, unfortunatly i have to pay for transfer costs from nsw to w.a, when i spoke to geoff, he sayed the guys he uses will fit up their stock parts and refit stuff like the airpods etc after, he assured me none of it would go missing, he mentioned compliance was a fair wack cheaper in nsw, but i am not home so i dont have the figures infront of me, i will check when im home

thinking about it, i kinda want it to come through perth so i can be in control of everything, but a 4 month wait would kill me,

rego i was going to do in perth when it got here, i will speak to geoff a little further,

cheers for the tips fellas :yes:

Edited by Jolinator

i think djr81 was hinting that if you just bought the car from mark hocking it would have been $1000 cheaper as you are now paying a broker fee ($1K to geoff) and FOB charge (~150,000yen to Mark). but in the grand scheme of things it's no big deal. I think you may have confused Mark hocking, with Mark Schuman people have posted some things about the second mark in the past.

where does geoff suggest complying it in sydney?

Yeah, well forum rules preclude me from expressing a full opinion.

But specifically, in this instance, what I am saying is that the compliance workshop needs to be found BEFORE you buy a car.

What you now have to work out is the cost of transport ex East and compare this with shipping the car in a container (As opposed to on a car transport). You may find there is little in it.

I suggest getting on the phone to your broker & demanding from him a list of compliance workshops, their location, costs for compliance/transport & the timeframe for doing the work in a given manner. After all that is what you are paying him $1100 for.

No point having a dog & then doing all the barking yourself.

  • 4 weeks later...

Autoworx in Wangara do compliance for R32's. They also have some basic standard parts that you can use to get your car complied. Give them a ring and speak to Paul. Imports 101 also do compliancing for R32's as well I believe so speak to Danny there.

when mine was complied in nsw it would have been $81 cheaper to have it complied in perth that included road freighting fromnsw to perth via TNT but at that stage no one here had raws for r 32

Compliance does not have to be organised before you purchase the car. Do not know where you go that from :dry:

However if you talk to the compliance workshop once you have purchased it and set a date for import, they will organise import approval for you.

If it is going to take 4 months, the best thing you can do is enquire is to how long it would take if u had compliance done in the eastern states and for it to be delivered to you in WA. Then weigh up whether it is worth the extra cash.

4 months however is only about 1 month longer than normally how long it takes, so yeh...delays suck, but they have to be expected.

I think it is best to sort out your compliance shop before you buy the car. Strictly speaking, it is not mandatory, but it is by far the better practice. Otherwise you can get into stupid situations like the one shown above and end up incurring delays and possibly having to spend more than you think because of additional transport costs etc.

However, it has to be done before you ship it.

But in any case it is a good idea to have all your ducks in a row before starting to spend money.

I completely agree with DJR81, you really need to have all your homework done beforehand, so it leaves less to chance, and less to get ripped off.

My car was complianced in Melb and then i TNT'd it to Perth, a costly exercise.

I bought it 18 months ago and there werent too many 32 GTR's for sale in WA

Having said that, I later found that it would have been cheaper to get my complianced here in WA, ho hum.

But I'm interested in why you bought a 32 GTR to import ? These days there are so many for sale in WA and i think people are hurting trying to sell them.

There are a few bargains around.

All in all your car looks very clean and tidy, so good luck :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...