Jump to content
SAU Community

Recommended Posts

I will be working over seas for six months getting some pretty good dollers, but am unsure now of what to do when I get back ? fix up my GTST or buy a GTR? The GTST has a number of mods allready and is running 165 rwkw, the inside outside is near stock , I was planing on dumping a rb25 in power fc , body kit and respray, re-trim inside and a few other little things spending about 10,000 - 12,000. Or sell it as is and buy a GTR and keep it near stock.

Link to comment
https://www.sau.com.au/forums/topic/126066-what-to-do-fix-up-gtst-or-get-a-gtr/
Share on other sites

I will be working over seas for six months getting some pretty good dollers, but am unsure now of what to do when I get back ? fix up my GTST or buy a GTR? The GTST has a number of mods allready and is running 165 rwkw, the inside outside is near stock , I was planing on dumping a rb25 in power fc , body kit and respray, re-trim inside and a few other little things spending about 10,000 - 12,000. Or sell it as is and buy a GTR and keep it near stock.

R32 GTSTs with RB25s are pretty fun! Very fast but cheaper to insure and WAY lighter on fuel that a GTR...well mine is anyway

Pretty good I think! He outlines the whole project here http://www.project32.net/

I would take you for a drive in mine but I blew the turbo!

It will be back in a week or two so If you want to take a look then let me know!

To be honest, if you're going o/s and when you come back have a lot of money to spend get a GTR.

But if you want just a car you can customise a bit more, just keep the gts-t. I can help you do the rb25 if you want. It's just more of a challenge to turn it into a good all round machine, but I like a challenge. If you can't be bothered stuffing around with things, the GTR has it all in one already.

Depends what you want to use the car for as well. It seems about 2/3 of GTR owners end up with a blown engine at some point, or are too scared to go to a track in case it does go. Usually sooner than later. With an rb25 it's at least a little lower on that ratio, and a lot cheaper to replace or rebuild if it does happen. I just think an old GTR = an expensive proposition.

As a wise man once said, A GTR is like an Ex Girlfriend... You never come out witch what you win in with.

As a GTR owner you better hope those pockets run deep if something go's wrong.

But oh god wile its working hold onto something becouse its a RUSH

In all honesty, & I believe this is a trap that so many people fall into, a GTR is as a MINIMUM a $30k investment.

Meaning either buy a car that has had a recent VERIFIED engine re-build or if you do take the gamble, make sure to budget for a re-build sooner rather than later.

There is NO SUCH THING as a bargain GTR (re: $20k etc) that won't cost you more in the long-run & the more you spend initially, the better off you'll be in the end.

Having said all that, there truly is NOTHING that can compare to a well prepped GTR for the price.

IF you're in the position to do the above, go the GTR. You'll never regret it!!

:whistling:

GTRs are a blast to drive when you don't own them but are getting old and very expensive!

On the flip side, now I've driven an R32 with an RB25 incerted, it also was an absolute blast with well sorted suspension and brakes i'd have it any day over a GTR! But it comes down to preference = YOURS.

So I say, Drive both and make your own mind up. I'm sure someone on these forums would be willing to take you for a spin sometime!

GTR FTW!!!

& SPUN BEARINGS FTW!!!

:P

but seriously, if you were to go gtr, dont get a stocko as itd be off the road most the time & ud be pouring alot more than 10k into it. So if you were to go gtr, then get a recently built one (ricknismo for instance, 27k cant go wrong!)

If you use to and want to slide the car all over the place don't get a GTR, their no where near as fun but the GTR just has so much more torque and feels so much better to drive and loves to rev so much more smoothly ... and spins bearings :banana:

There is NO SUCH THING as a bargain GTR (re: $20k etc) that won't cost you more in the long-run & the more you spend initially, the better off you'll be in the end.

Not true in all cases, just most. But I agree, it is far better to spend more upfront and get one with mods and allow $6k or so for a rebuild just in case.

A 32 GT-R can be just as much fun sideways as a GTS-T if you pull the fuse or put in a simple toggle switch to disable the 4WD too.

I just don't know. I've driven both a lightly modded R32 GTR and a highly modded GTS-T and for the get-off-the-line-holy-crap, you can't go past a GTR. BUT!!! The GTS-T was only 1 second behind the GTR on the National Circuit at QR, same driver. For the dollars and fun factor, I would go a GTS-T (RB25 only though)

Also, a lot of the GTR owners I know are not game to launch hard because they are frightened of breaking something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...