Jump to content
SAU Community

Recommended Posts

I tried to put in my intercooler today and managed to remove alot of skin from my knuckles.... and thats about it.

My 32 has the active front spoiler which is fitted to the exact place my cooler bolts onto. To get to the bolts on top of there mount you either have to remove the headlights or remove the front reinforment bar. Both kicked my ass :(

The nuts that hold the headlights in from are hidden behind a few hoses that can't be moved easily and I can't fit a tool in there. The front reinforcment bar is held in by 2 big bolts and 2 nuts. I got the bolt off one side easy enough but couldn't get the damned bolt off. I tried covering it in RP7 and left it a atleast an hour and still no luck.

Anyone know of a way I can get them off?

It'd be a very straighforeward install if I could remove the spoiler motors :wave:

or is there someone I can take it that'll give me a hand (and has the right tools)? I don't really wanna pay someone to do it all for me cause I want to learn to do things for myself

Cheers

-Matt

im not quite sure what ya talkign about but i had troubles getting my bumper off the intrution bar that was held by 2 plastic clips.. so in the end i just took it all off and once off the bumper was soo much easier to take off.. i didnt have to take off my lights or anything

im not quite sure what ya talkign about but i had troubles getting my bumper off the intrution bar that was held by 2 plastic clips.. so in the end i just took it all off and once off the bumper was soo much easier to take off.. i didnt have to take off my lights or anything

oh sorry, intrusion bar = reinforcement bar

I wasn't exactly sure what it was called. I got the front bumper off easy enough, but the intrusion bar didn't want to come off. Theres two pieces of metal coming down where you driving lights mount to, the front spoiler and its motor's etc are mounted to the inner side of that. They have bolts that hold them on from the top of that bit of metal which is under the headlight.

If I can get the front spoiler motors off I would be set

I've taken off a few r32 bars/headlights/reos. The trick is you have to use the right tools.

when you said you can't get a tool in there, what are you trying to get in there? a spanner? some bolts can't be reached by the spanner.

also, a 1/2" ratchet and extension might be too big.

I also have a 1/4" socket set for fitting into those tight areas.

taking the bar off is a piece of cake. same as headlights. same as reo.

I've never seen that active spoiler thing, but I suppose it'll have to come off anyways for the fmic. Even if it didn't, they're pretty gay. Just rip that off if it's in the way.

Ok, let me try and explain how to do it.

Take the indicators out. It's like one screw. then just pull it.

take the wheel arch plastic off first. If you can't remove the clips easily, just break them. you can buy new ones from autobarn for like $2.

Then take the bar off. you dont' ahve to take the headlight off. There are bolts under the wheel arch plastic. and bolts where the indicator was.

the motors shouldn't be in the way, because the bolts you need to access to take off the front bar are no where near there. Secondly, you can't get off the reinforcement bar without first taking off the front bar.

ther eis no need to take off that reinforcement bar. cut it on the car. easier. but if you want to take it off, it's only 2 bolts. they're not very tight either.

Follow these instructions and you won't have any troubles. If you do it like this, the job will go from being a 10/10 like what you thtink it is now, to a 1/10.

Cheers

Edited by 97r33gtst-typeM

lol umm... I got the front bar off no problem

The reo and headlights is what I can't get off. The reo is held is by a bolt and a nut on each side. I got the bolts out and the nuts wouldn't budge so the reo wouldn't slide forward. I tried a spanner and my little socket set with no luck.

The headlights were even worse. I took the battery out and got the nut sitting under the what I think is a power stearing line. Further down is another nut but its stuck behind a solid pipe that isn't gonna move in a hurry. I could barely get a finger to it let alone a tool.

Cheers for your help

Success!

I bought a socket adapter that let me use my big wrench and got the sucker off. With a bit more swearing and skinned knuckles I finally got it on. The reo isn't sitting perfect yet and I ran out of daylight to cut the front bar but its all good sofar.

If you have a active spoiler you have a up/down button on the left of the driver. I think you have to have the hand brake on before it'll work manually for some reason. Mine was pretty loud, you could hear it over the radio if it wasn't turned up alot.

post-28866-1153230136.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
×
×
  • Create New...