Jump to content
SAU Community

Recommended Posts

Just found out something curious

Officially, stageas have less power at the flywheel stock than R33's.

Skyline http://english.auto.vl.ru/catalog/nissan/s...e/1996_1/21671/

vs

Stagea http://english.auto.vl.ru/catalog/nissan/s...a/1997_8/21850/

Why the hell did they detune the stagea when its 300kg heavier!

Link to comment
https://www.sau.com.au/forums/topic/126625-stagea-vs-skyline-std-power-figures/
Share on other sites

Nissan decided that the S1 auto gearbox needed some protection from the heavier weight

The manual (S2) Stageas have the same power as (R34GTT) Skylines

But what about S2 autos and R34GTT autos?

:D cheers :D

Edited by Sydneykid

Somewhere in Skylines there is a comparison of a Stagea, (S1 or S2 I dont know) and two or three other FI cars. The Stagea did better than some. Perhaps someone (SK) knows what thread.

According to this: http://english.auto.vl.ru/catalog/nissan/s...a/2000_6/21829/

The S2 Auto and Manual both have 280ps, which doesn't surprise me too much.

I was under the impression Stagea rb25det runs a little less boost that R33 versions. Like 6-7psi Stagea, 8psi Skyline. Although that would imply different ECU maps, otherwise, based on Stagea AF's, the Skyline would be too rich.

It's just a different calibration to protect the auto. The autos break! Heaps of cars are detuned for the auto variants. The Stagea is detuned a bit more than the skyline auto because it id heavier and AWD.

yea true the detune it cos their auto gearbox cant take it. This is also true for an Rx8 an uto the rev limit is at 7k where the manuak goes to 9.5k rpm.

well, i really dont think 10kw difference will kill an auto box....

but hey, we've all worked out an extra 60-70kw can :cheers:

More likely the 20 nm of extra torque

Regarding boost, our Stagea came with 4 psi / 6psi (high / low)

The R33GTST came to us with 5.5 psi / 7.5 psi (high / low)

So my guess is the extra 1.5 psi of boost accounts for the torque difference.

Auto ECU’s and manual ECUs in R33GTST’s are definitely different.

When I swap the turbo on the Stagea, I will check the wastegate actuator spring pressure. If my guess is correct, the Stagea wastegate spring should be ~1.5 psi lower than the R33GTST spring.

:ban: cheers ;)

I always thought this was just down to slightly different configuration between the two cars.

To use another example, look at where the VQ35DE engine is used, its in like 5 different nissan cars (probably more), including the 350Z, stagea M35, maxima, skyline v35, patrol?, and there are sure to be others I've missed.

In all of these cars the power figures differ - either in kw or torque or both.

I figured it was just that the setup is configured differently depending on the purpose or the target market of the car.

Sounds like the same theory diesel engine manufacturers have.

Most common rail deisels will produce a difference of up to 200 HP from the same motor simply by programming the ECU. You simply tell them what you want the motor to do and they'll program it for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 🤣
×
×
  • Create New...