Jump to content
SAU Community

Recommended Posts

well finally after a huge long rebuild time of 12 months its finally got a go on the dyno, and it went alot better than expected on the low boost setting so im lovin it :O even blowing flames on over run which looks maddd :(

boost is on a low 13psi and rpm limit is 9000rpm. no power figures are gonna be published on here due to the amount of people in the non stagea sections wanting to slag on others results so i think ill keep it quite.

ive got a couple of power runs

turbo and manifold glowing as it boosts up

thats all i can do at the moment as i gotta goto work, ill post the others of the flames, etc after work.

stay tuned :(

Brad :wave:

Link to comment
https://www.sau.com.au/forums/topic/126997-rb26-stagea-dyno-videos/
Share on other sites

Brad, simply out of a matter of interest (yes, Im interested in your total buildup, LOL, and Im NOT a slanger, far from it - backslaps all round, hear hear) - would love to know what the 2.7 pulled on low boost. :wave:

Excellent work Brad. Congrats for sticking with it, I know its hard when they are off the road for so long, still waiting for mine! Should be back in a week though.

PM me the figure, would love to know!

Nice to see it all up and running!

Sounds very nice!

However (this is a good thing haha) i thought you were gonna go external gate or did you decide that it would be a little less offensive to plumb it back?

Either way can't wait to see Final Final (figures) result!

Keep up the good work!

Edited by MADGT4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...