Jump to content
SAU Community

Recommended Posts

HI all ,

OK i need any info i can get i have a R32 gts-t

it some times just cuts out on accleration and wont do nothing till i back off then it stutters and runs again.

Here is a list of parts ive replaced trying to fix this problem.

AFM

Fuel pump

O2 sensor

TPS

Crank angle sensor

Checked all Coil packs

Igniter.

If anyone has had a similar problem and fixed PLEASE tell me how.

Edited by Vertex32R

It could be your BOV my friend has the same probl;em on his 200 he found out it was the BOV on the dyno ,

no 1 can really say anything unless you tell us what mods u got in da car..

ok list of mods:

Walbro 620hp fuel pump

GTR injectors+coil packs

Rebuild HF turbo running about 12psi (boosted by A little turbosmart bleed valve)

Apexi Air intake

Hybrid GT FMIC

Sparkies are iridium (NGK)

Full HKS Hi-Power Exaust (turbo back)

Hi-flow cat.

Balanced Lightwight pully set.

Lightened Fly wheel.

thats bout all i can think of rite now got some transmission mods but i think they are irelavent.

oh and i dont have BOV at all. (steel plate to block it)

And to add the Crank angel sensor takes 5 min to change it cost me $80 for a spare.

Also for some reason my car idles at about 1200 rpm....and my timings ok so i dont know WTF

it never used to do this and when it was running good i got a good 187rwkw...

so you can understand why im so upset....last dyno run got me a humble 145rwkw and they guys said was my O2 sensor so i changed it but no help....the car now lacks responsiveness and still has the shuting off problem.

any help will be much apriciated

Ta.

Edited by Vertex32R

For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

Gap is 0.9 mm

Ecu is stock with a mines sticker sealing it it came like that.

Also got a malpassi Fuel reg tuned on the dyno.

Guest 40th-edition
For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

The O2 senser cuts out on idle and fast acceleration..

have u tryed fuel filter??

injector pulse??

And when was the last time the injectors were cleaned?

I strongly suspect it's somehow running rich - and rich mixtures don't make power, and might cause flooding on accelleration.

Injectors where serviced when i put them in about 6 months ago.

I dont know WTF it is but its gradualy getting worse.

i think its time for a dyno run ill let you guys know the results so ppl can learn from this but please continue postingn ideas.

  • 1 year later...

I would get the mines ECU retuned to suit Aus octane levels if it was a fresh import, o/wise isnt the impedance of the GTR injectors different to the GTST?

Better yet get a greddy emu

  • 3 weeks later...

getting same prob too guys. mine stalls on idle and throttle cuts off sumtimes and then it jerks like crazy. usually to avoid the problem i kick the clutch and rev it hard. todat throtle jus died for like 2 mins. pretty dangerous.

car: 1990 r32 gts-t type m

stock standard motor running invidia cat back zorst 3"

stock boost 10psi

stock cooler and airbox too

my mechanic tetsed the injectors and fulr no prob there and throttle body is fine. NEED HELP pls cheers

  • 2 weeks later...

mine's having the same problems too... everything's fine until 3000RPM - 4000RPM, then after that, it's fine again..

It backfires and stutters until i take my foot of the throttle.

(Standard RB25DET)

mine stalls on idle and throttle cuts off sumtimes and then it jerks like crazy.

I reckon might be two different problems there.

If the boost builds and builds and then suddenly cuts off altogether with an almighty jerk of the chassis. Normally this is a pretty classic overboosting symptom. The ECU then goes shit, if this keeps going it's gonna blow the head gasket and shuts it off I believe.

Wow I can't believe you're still driving it when it's doing this man lol, I overboosted mine at first, above happened and it's (as I'm sure you've experienced) such a huge, strange and absolutely wrong feeling thing to happen in the car for it to cut boost and jerk like that, alarm bells were going off in my head straight away when it happened to me lol.

But you're not overboosting soo.....I dunno? ECU thinks you are for some reason - something dodgy, vaccuum lines all in tact?

Dunno, I'm FAR from an expert - you should ask one asap dude, cos cutting the boost suddenly like that is ECU's last resort "you're gonna blow it" tactic.

For most of the other problems listed above - misfires etc, I'd get the coils checked. If it's not the injectors it's probably a blorked coil I think?

I dunno, I just pick up stuff I see and hear around the traps, one of you expert guys come explain :nyaanyaa:

PS Phiboy if your mechanic doesn't know the cut-off is usually associated with overboosting, he's either the worst mechanic ever or he's never even looked at a turbocharger. Either way, I'd be switching. Dunno where you live but if you live in brissie I can put you onto a competent and thorough but not "boutique tuner price" mechanic, he doesn't claim to know everything about skylines but he has rebuilt his own 11 second, concourse winning car from the ground up - so you know he does it cos he loooooooooves cars.

And he's my uncle :w00t:

Edited by silversr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...