Jump to content
SAU Community

Recommended Posts

HI all ,

OK i need any info i can get i have a R32 gts-t

it some times just cuts out on accleration and wont do nothing till i back off then it stutters and runs again.

Here is a list of parts ive replaced trying to fix this problem.

AFM

Fuel pump

O2 sensor

TPS

Crank angle sensor

Checked all Coil packs

Igniter.

If anyone has had a similar problem and fixed PLEASE tell me how.

Edited by Vertex32R

It could be your BOV my friend has the same probl;em on his 200 he found out it was the BOV on the dyno ,

no 1 can really say anything unless you tell us what mods u got in da car..

ok list of mods:

Walbro 620hp fuel pump

GTR injectors+coil packs

Rebuild HF turbo running about 12psi (boosted by A little turbosmart bleed valve)

Apexi Air intake

Hybrid GT FMIC

Sparkies are iridium (NGK)

Full HKS Hi-Power Exaust (turbo back)

Hi-flow cat.

Balanced Lightwight pully set.

Lightened Fly wheel.

thats bout all i can think of rite now got some transmission mods but i think they are irelavent.

oh and i dont have BOV at all. (steel plate to block it)

And to add the Crank angel sensor takes 5 min to change it cost me $80 for a spare.

Also for some reason my car idles at about 1200 rpm....and my timings ok so i dont know WTF

it never used to do this and when it was running good i got a good 187rwkw...

so you can understand why im so upset....last dyno run got me a humble 145rwkw and they guys said was my O2 sensor so i changed it but no help....the car now lacks responsiveness and still has the shuting off problem.

any help will be much apriciated

Ta.

Edited by Vertex32R

For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

Gap is 0.9 mm

Ecu is stock with a mines sticker sealing it it came like that.

Also got a malpassi Fuel reg tuned on the dyno.

Guest 40th-edition
For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

The O2 senser cuts out on idle and fast acceleration..

have u tryed fuel filter??

injector pulse??

And when was the last time the injectors were cleaned?

I strongly suspect it's somehow running rich - and rich mixtures don't make power, and might cause flooding on accelleration.

Injectors where serviced when i put them in about 6 months ago.

I dont know WTF it is but its gradualy getting worse.

i think its time for a dyno run ill let you guys know the results so ppl can learn from this but please continue postingn ideas.

  • 1 year later...

I would get the mines ECU retuned to suit Aus octane levels if it was a fresh import, o/wise isnt the impedance of the GTR injectors different to the GTST?

Better yet get a greddy emu

  • 3 weeks later...

getting same prob too guys. mine stalls on idle and throttle cuts off sumtimes and then it jerks like crazy. usually to avoid the problem i kick the clutch and rev it hard. todat throtle jus died for like 2 mins. pretty dangerous.

car: 1990 r32 gts-t type m

stock standard motor running invidia cat back zorst 3"

stock boost 10psi

stock cooler and airbox too

my mechanic tetsed the injectors and fulr no prob there and throttle body is fine. NEED HELP pls cheers

  • 2 weeks later...

mine's having the same problems too... everything's fine until 3000RPM - 4000RPM, then after that, it's fine again..

It backfires and stutters until i take my foot of the throttle.

(Standard RB25DET)

mine stalls on idle and throttle cuts off sumtimes and then it jerks like crazy.

I reckon might be two different problems there.

If the boost builds and builds and then suddenly cuts off altogether with an almighty jerk of the chassis. Normally this is a pretty classic overboosting symptom. The ECU then goes shit, if this keeps going it's gonna blow the head gasket and shuts it off I believe.

Wow I can't believe you're still driving it when it's doing this man lol, I overboosted mine at first, above happened and it's (as I'm sure you've experienced) such a huge, strange and absolutely wrong feeling thing to happen in the car for it to cut boost and jerk like that, alarm bells were going off in my head straight away when it happened to me lol.

But you're not overboosting soo.....I dunno? ECU thinks you are for some reason - something dodgy, vaccuum lines all in tact?

Dunno, I'm FAR from an expert - you should ask one asap dude, cos cutting the boost suddenly like that is ECU's last resort "you're gonna blow it" tactic.

For most of the other problems listed above - misfires etc, I'd get the coils checked. If it's not the injectors it's probably a blorked coil I think?

I dunno, I just pick up stuff I see and hear around the traps, one of you expert guys come explain :nyaanyaa:

PS Phiboy if your mechanic doesn't know the cut-off is usually associated with overboosting, he's either the worst mechanic ever or he's never even looked at a turbocharger. Either way, I'd be switching. Dunno where you live but if you live in brissie I can put you onto a competent and thorough but not "boutique tuner price" mechanic, he doesn't claim to know everything about skylines but he has rebuilt his own 11 second, concourse winning car from the ground up - so you know he does it cos he loooooooooves cars.

And he's my uncle :w00t:

Edited by silversr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They’re so great that I know of someone pulling one out to go back to a sequential 
    • Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part that I'm aware of. I don't see how they go together, so I'm making the assumption that they have to, somehow. I know the center splash guard is different on the V-Spec (and is the price of the damn diffuser alone). How does the liner interact with this? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
    • Really, effort is pretty low. You hand fistfuls of cash over to someone else and pick it up when done...   And at least this shitbox isn't drinking coolant right?  
    • And most chargers that most DIY people own would put bugger all power back into the battery between cylinders. I've always done it with jumper packs/second battery connected. And that's on any car.   Because race car, and wanting the lightness.  At least in an R33, putting a bigger battery in can at least help shift the weight balance backwards  
    • OR, Tell the Motec to STFU, you said shift, so try shifting! But then yes, I agree, more sensors needed to. Put either a wheel speed sensor, or a diff speed sensor on it. Then get an input shaft speed sensor too. (I say input shaft speed, and not engine RPM). This way, you can now also log and see if the clutch is slipping (RPM, vs input shaft speed), and you can calculate gear (Input shaft speed / Output shaft speed). At least then if the gear position sensor fails you have a backup. And realistically, the Motec should only worry about what gear you're in for the parts where I'm assuming you have some power management strategies in it for the lower gears. (IE, lower boost, maybe different throttle curves, different ignition curves, etc etc). But it should stop it shifting. Pull the flappy, that f**ker should just attempt the motion! Heck, even on a sequential like on a motorbike, you can keep trying to kick it up a gear all you want, the physically part of the box takes care of not being able to loop the whole way around the box! Only part you'd have to worry is how it gets to reverse.  But that's on the driver... An R32 shouldn't be so smart as to try and override the driver on a gear shift  
×
×
  • Create New...