Jump to content
SAU Community

Recommended Posts

hey im pretty happy with my suspension set up at the moment i spose but its just to high, got like 3 inches between my tyres and my wheel arches. If i put bigger rims on they'll fill up the gaurds better but will also make my car higher so.. I spose ill leave the 17's on it and get it lowered. Its a Type-M, so the sides have skirts and are already pretty low, so whats the mimimum distance from ground to kit? At the sides? does the front matter as much? Any other information would be cool, my car looks pretty average at the moment.

Link to comment
https://www.sau.com.au/forums/topic/127904-minimum-ride-height/
Share on other sites

this is such a bullshit law....100mm ride height FULLY LOADED. drive a brand spankin new Clubsport off tyhe showroom floor, chuck 5 average sized adults in it , put some small luaggage in the boot..........100mm? i dont think so! so basically if u buy a brand new car, unmodified, fully loaded u can get d*cked by the cops...so what u do then? rise the stock ride height?

A Victorian TMU car fitted with the FE2 type holden "sports" suspension is under the minimum ride height for victoria at all times regardless of load. The suspension lowers the vehicle to 94mm.

Pity I havent got myself a uniform and a gun...

But, interestingly enough most road worthy testers test the vehicle unladen. The Information from Vicroads does not specify the car must be loaded. It must only clear the height and travel requirements.

I have always explained this to any Police officer who was nice enought to want to look at my car. I also have a print of the Vehicle standards information from vicroads in the car. No where in this entire document does it say i must be in the car.

However... When you are doing this, be nice, professional in your approach and becareful not to be to defiant, you can be charged for failing to obey a policeman.

Unfortunately it is once again a case of a motorist/car owner having to prove themselves innocent by getting a roadworthy from either the police not knowing the law or using their "discretion" and applying penalty where no penalty is due.

You have to remember poor old "johhny copper" here's a thousand bulls**t stories as to why the car is legal. How can he beleive yours?

Either way from their point of view or ours it is a no win situation.

Edited by frx026

frx026 mentions the vehicle being unladen when tested which makes sense as what is the tester going to do, get 4 mates in greasy overalls to jump in the car and test it.

I thought the vehicle had to be no lower than 100mm with 1 adult, might be wrong.

  • 6 months later...

I took my car to pedders, because the rwc guy said i need to lift the car... The pedders guy said my HSD coilovers wont lift much just like 10mms ? atm the lowest point on the car is my zorst thingo... at around 90mm? is the peders guy talking shit or could i lift the car more ?

Edit; btw he told me i need to pay 2 grand to get new suspension ?

Edited by Nefret
  • 4 months later...

I got pulled over the other w/e and when i got rwc my car was sitting around 130mm ? and i have hsd coilovers, the cop put the thing underneath it and my exhaust pipe hit and im like i got it rwc this that i can show u papers his like it doesnt matter we have to check fully loaded 4 passengers with a full tank of fuel ? even thou i got canaried for other stuff the ride height pissed me off... i dont think my car would drop more than 3 cms with coilovers and with extra 150 kilos because i only had 2 mates in the car. :@:@

edit; even if i go to get rwc there goign to check it and its goign to be legal... so double u t f.

Edited by Nefret
You have to remember poor old "johhny copper" here's a thousand bulls**t stories as to why the car is legal. How can he beleive yours?

Pppft "Jonny Copper" can go eat a d|ck. I'm ALWAYS nice, polite and respectable to no avail so I'm over it.

Yes they can ask you to get back in the car as I was. The second time I told him it was 110mm he conveniently didn't have his measuring device..BS!

100mm is the minimum clearance with passengers and full tank of fuel. payload is different, so people saying golf clubs aswell, they cant be counted. in a skyline its 4 ppl and full tank fuel = 100mm ride clearance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
×
×
  • Create New...