Jump to content
SAU Community

Recommended Posts

Well done :D They mentioned the owner was from Australia too... good on them.

Not really into Kei's but with those 'bargain mods' how much power did it make?

its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

Edited by Hungryhippo
its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

lol yeah misread it... :happy: stupid mistake.

I'm wondering what that Suzuki Cappucino was running to hit 242km/h (can't remember who modified it)? I've heard someone getting 200+hp from an F6A... doesn't sound like much but I can only imagine what it would be like to drive.

the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :happy:

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

Edited by Hungryhippo
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :yes:

If he can get 300ps thats gotta be up there as one of the most powerful F6A's yeah? Gotta remind people reading this thread that 760cc refers to engine capacity not injector size :happy:

thats what hes shooting for.hes using the old k6a.the newer one like the one in my car with individual coil packs doesnt seem as good for insane power levels.its better suited for street use,much wider spread of power but not so much topend. 250 is the absolute max he can get from 660cc so hes upping it to 760cc

Edited by Hungryhippo

its a year old.shakken in 2 years.the e-manage will be ok.one of his customers even got his car passed without a cat.they really dont care about keis here when it comes to regulations.it only costs 30 000yen for shakken but from what ive heard its around 100 000 yen for a normal car.i also dont have a cat but fingers crossed i wont have to put the cat back on.

Yeah shaken for my HCR32 was around 100,000yen. Ever driven a Honda Z? I know they look more like a mini 4WD, but Honda factory turbo does have a ring to it... I've never seen any modded examples around, just the odd one in traffic.

Like I said I've never really been into Kei's, even after 5+ years in Japan never really bothered to check them out... although I did borrow a friends AT Suzuki Wagon R RR (with BOV) for a couple of days lol... but this has been pretty interesting. Thanks for the insight :cheers:

nah.only driven suzuki kei cars.alto and cappuccino.oh man, u drove a wagonr rr auto?????ouch.

ive always liked little cars.and with the price of petrol now im kinda glad ive got a kei.even bouncing off the rev limiter in the mountains for a few hours i get around 11 litres/100kms.

  • 4 weeks later...
  • 4 weeks later...
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc smile.gif

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

u no where i can get more info on his car :D ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...