Jump to content
SAU Community

Recommended Posts

Well done :D They mentioned the owner was from Australia too... good on them.

Not really into Kei's but with those 'bargain mods' how much power did it make?

its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

Edited by Hungryhippo
its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

lol yeah misread it... :happy: stupid mistake.

I'm wondering what that Suzuki Cappucino was running to hit 242km/h (can't remember who modified it)? I've heard someone getting 200+hp from an F6A... doesn't sound like much but I can only imagine what it would be like to drive.

the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :happy:

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

Edited by Hungryhippo
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :yes:

If he can get 300ps thats gotta be up there as one of the most powerful F6A's yeah? Gotta remind people reading this thread that 760cc refers to engine capacity not injector size :happy:

thats what hes shooting for.hes using the old k6a.the newer one like the one in my car with individual coil packs doesnt seem as good for insane power levels.its better suited for street use,much wider spread of power but not so much topend. 250 is the absolute max he can get from 660cc so hes upping it to 760cc

Edited by Hungryhippo

its a year old.shakken in 2 years.the e-manage will be ok.one of his customers even got his car passed without a cat.they really dont care about keis here when it comes to regulations.it only costs 30 000yen for shakken but from what ive heard its around 100 000 yen for a normal car.i also dont have a cat but fingers crossed i wont have to put the cat back on.

Yeah shaken for my HCR32 was around 100,000yen. Ever driven a Honda Z? I know they look more like a mini 4WD, but Honda factory turbo does have a ring to it... I've never seen any modded examples around, just the odd one in traffic.

Like I said I've never really been into Kei's, even after 5+ years in Japan never really bothered to check them out... although I did borrow a friends AT Suzuki Wagon R RR (with BOV) for a couple of days lol... but this has been pretty interesting. Thanks for the insight :cheers:

nah.only driven suzuki kei cars.alto and cappuccino.oh man, u drove a wagonr rr auto?????ouch.

ive always liked little cars.and with the price of petrol now im kinda glad ive got a kei.even bouncing off the rev limiter in the mountains for a few hours i get around 11 litres/100kms.

  • 4 weeks later...
  • 4 weeks later...
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc smile.gif

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

u no where i can get more info on his car :D ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I like their veal scallopini.
    • Definitely a hearty eater when we go out, I consider these meals my cheat day as I've been watching my calories in and calories out pretty hard since my little fun size stroke, I've gone from a fat boy of 89 Kg, I'm only 165cm tall/short, down to a almost semi lean 73 Kg over the last few years, I'm currently around 17% body fat which my doctor is very happy with, but, my goal is to slowly get down to and maintain 15%,so yeah, I want all of the protein, carbs, fats and sugars when I go out for a binge
    • There was a great one on Victoria Rd in Gladesville too back in the day. I can only assume GTSBoy is thinking of the mill up on the wollondilly, no restaurant there any more but they have restored the original steam engine on site and run it every few months, have an annual steampunk festival etc @The Bogan, you came to the wrong town for restaurants. we have a few reasonable asian and indian options but the Paragon is as good as it gets otherwise. That brewery is apparently just opened, been meaning to give it a go some time. The Highlands have plenty of fancy options but I suspect you are more a hearty eater than fancy eater
    • Thanks for coming back to post the update, maybe it will help out the next person!
    • Going by the intake & injectors I'd be guessing it's a DE, check the head casting number, should be 5L8 on a DET, 5L7 I think is the DE number.
×
×
  • Create New...