Jump to content
SAU Community

Recommended Posts

I've used Tech wax. Its not bad but because it has minor abrasives in it, there is little point using more than 2 layers because you'll just be rubbing off the previous one. You'll definitely need to prep the car first before using tech wax. Something with a mild polish like Meg's ColorX would do the job nicely!

Im with Nate31. That zamol stuff is nice gear hey. Bloody exxy tho, the top of the line stuff is $13k (yes $13 000, but free refils for life). Look on their website for the stockest of it. Most of their gear is natural product.

The clay works awesome. You can see the grim on the clay. Once your done you can run your hand over it with your finger nails and feel how much smoother it is. I really is a MUST if your doing it properly. Makes a massive difference.

Waxed my R32 today :)

Used a single coat of Meguiars Yellow Tech Wax and left it in the sun whilst I vacuumed the car. Buffed it out with a orbital buffer and got all the little bits with a microfibre cloth.

When I first got the car it had heaps of swirls. I washed, clayed and washed again. I went around a few times with the orbital buffer and some megs fine cut cleaner #2. Then I did the tech wax. Came up perfect for 13 year old paint. I just need some touch up paint to get rid of all the stone chips and scratches now.

Megs Crystal polymer sealant is also decent substitute for the Tech Wax if you not into waxing your car every month. Shine isn't as great but it lasts for ages. I used it on my parents cars and they came up great after a cut and polish. They still look clean after 3 weeks now.

Photo was taken with my phone so excuse the quality

post-28866-1154686313.jpg

All this talk about claying, I thought i'd give it a shot tonight. So off to Motoquipe and $40 later, i had the Meguires Quik Clay pack.

Man that stuff works a treat... the amount of gunk that was on my bonnet surprised me. I also used it to remove the usual japanese pollutants off my window.

Highly recommended.

So after you clay, what do you puy on next Nate?

(writing my shopping list..lol)

It should go something like -

Wash with degreaser/detergent (to remove wax/polish)

Claybar

Wash again

Polish (with swirl remover if needed)

Wax or Sealant

u guys do relise that wax is bad to use on ur car, if u ever need a respray or are plannin on getting one, wen u rub it bac an try an paint over it the paint doesnt like sticking, trust me my dads a panelbeater an it happend to my vl.

there for no wax for me.

u guys do relise that wax is bad to use on ur car, if u ever need a respray or are plannin on getting one, wen u rub it bac an try an paint over it the paint doesnt like sticking, trust me my dads a panelbeater an it happend to my vl.

there for no wax for me.

If the repairer cant remove the wax they havent prepped enough (their problem not mine)

Polymer finishes are usually worse than wax as they can penetrate deeper into the paint (agin a good prep will fix this)

If the painter cant get the wax out of the paint, ask them to take it back to metal.

hey pals, abit off topic but what orbital buffers do you use?

i was thinking about just buying a shitty gmc orbital buffer and some good quality microfirbre buffing cloths.

will this do or should i save and buy a better quality buffer?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...