Jump to content
SAU Community

Recommended Posts

Well.. Just spent $90 + 3 hours washing, polishing and waxing the car...

Pics:

Used AutoGlym Bodywork Shampoo to wash the car all over..

Than used AutoGlym Ultra Deep Shine polish to remove as many of the scratches as possible.. They didn't have any Clay when I went up there which was a bit frustrating.. I noticed that this would certainly have picked up some of the water marks on the roof..

Polish did get rid of alot of dirt + some minor scratches..

Waxed with McGuiars canubra wax or whatever it was.. looks good, not the deepest shine, certainly cleaner.. and smells like wax now..

Would love to buff with an electric buffer...

All up, I haven't done this in over a year (i know..) but i'll keep up the wash + wax every couple of months.. it stays garaged + only driven 2 times at the most a week...

Forgot to add - My ARM FRICKIN HURTS..

Clay bars are excellent, but a mild swirl remover would probably be better to try on water marks.

An electric buff does take the elbow work out of it. Bosch make and excellent Random Orbit Sander (RO) that is good for those mere mortals amongst us. I would stay away froma non orbital buff (9 inch grinder type) as they can rip up paint easily and dont have speed adjustment. RO are very user friendly but I still use arm power for the wax

  • 1 month later...

Best products I have ever used and will continue using is the Mothers Clay bar, Mothers Scratch/Paint sealer and Mothers Canubra wax - I must admit the other half gave me the Mothers wax system with a orbital polisher and the key to this is that it distributes the wax evenly over the car so you use much less product and much less effort is required to apply and remove takes me about 2 hours to wash and 3 stage wax my car total cost for the polishing kit including the orbital polisher $150... money well spent

I use a mothers detailing kit, its available from www.summitracing.com costs about 70 buck till my country. probly about 100 till aussie. but its money well spent, you get like 10 different things to get your car shiny, comes with rim and tire polish, makes your car like new. and use those hands boys, god didnt give them just to wank off

  • 1 month later...
Best products I have ever used and will continue using is the Mothers Clay bar, Mothers Scratch/Paint sealer and Mothers Canubra wax - I must admit the other half gave me the Mothers wax system with a orbital polisher and the key to this is that it distributes the wax evenly over the car so you use much less product and much less effort is required to apply and remove takes me about 2 hours to wash and 3 stage wax my car total cost for the polishing kit including the orbital polisher $150... money well spent

I just purchased the Mothers Wax attack kit (electrical buffer)

Ive been reading/asking on Mothers forum and they say to use PowerPolish and PowerWax with the buffer. As they are both activated by the buffer. Problem is no australian store stocks PowerPolish...They told me to use Mothers Scratch Remover which is an alternative to PowerPolish. They state it will remove scratches, old wax etc.

Do you use the Mothers CleanerWax or do you use Mothers 3stage seperate system?

Thanks

  • 4 weeks later...

I did;

- Wash car with meg car suds

- Clayed car with Mothers Claybar

- Mothers Wax Attack Random Orbital buffer

--------- Mothers Scratch remover (whole car buffed)

--------- Mothers PowerWax

Results; (my paint is in real bad condition so it was the best i could get it to look :rofl: )

dscn4009mediumoa3.jpg

dscn4018mediumbu6.jpg

dscn4026mediumzq3.jpg

dscn4027mediumvd6.jpg

dscn4031mediumyg1.jpg

hmm... interesting thread. picking up tomorrow the following (some stuff i've already got)

Bosch RO

Edge polishing pads

menzerna polishes (power gloss, intensive polish, final finish)

OCW wax (optimum car wax) part synthetic/carnauba. Sooo easy to use. Spray bottle

Clay magic blue

Aquatouch MF (microfibre) (for buffing polish/wax)

Aquatouch MF washmit

Waffle Weave drying towel (MF)

Final Inspection car shampoo

Can't go wrong with these brands.

Zaino

Zymol

Swissol

Menzerna

Polylack (great sealants)

P21s (some good products, P21s wax, paint cleanser)

Detailing products can get VERY pricey, but there are lots of great products around for mortal prices.

Just read the first few pages, and man is there some mis-information. For nutter saying it was stupid to wait for overnight after applying a wax, most carnauba waxes have curing times, ie you HAVE to wait before layering. Carnauba waxes look better after they've been layered, so again to that nutter saying why put wax ontop of a wax, well, to achieve greater depth and gloss :/

Some waxes add a nice glow, with extra depth, some are just clinical in their clarity. The Polylack sealants are like that, will make your metallic flakes really POP and the clarity will be insane, but some people don't like that. So you top the sealant with a carnauba wax, layer it a few times and get the great deep/wet/gloss look. Killer on black cars.

Haven't read through the whole thread, but the first page alone was full of mis-information

Gave my car's paint a bit of attention for the first time (apart from a standard wash).

Before, dirty and swirls all over it

post-13456-1180849047_thumb.jpg

post-13456-1180849264_thumb.jpg

Did a test spot as there's no point doing the whole car before you can do it to a small section.

post-13456-1180849116_thumb.jpg

post-13456-1180849147_thumb.jpg

After

post-13456-1180849337_thumb.jpg

post-13456-1180849401_thumb.jpg

post-13456-1180849427_thumb.jpg

Process:

Washed car with Meguiar's NXT Car Wash

Clayed with Meguiar's Quik Clay

Random Orbital polisher with Meguiar's Dual action cleaner polish (M83)

Random Orbital polisher with Meguiar's Speed Glaze (M80)

2 coats of Meguiar's NXT Tech Wax.

Easy test for NXT Tech wax (possibly for most??). Spread it on your prepped surface as evenly as possible. Let it sit, after a while use a clean finger to swipe off some wax. If you can see nice shiny paint its ready to come off. If it is a smeary streak it needs to sit longer.

Have started off with the Meguiar's products as there's heaps of info about them. May start to try some other products later on.

Edited by Fry_33
  • 1 month later...

Gotta Love Zaino

This pic was on a pretty cloudy day as well.

Used

Mothers Soft Wash

Megs clay

Z-AIO

Z-CS

Z-8 Final

I've had it on for a couple of weeks now and this stuff is awesome. Dirt, bugs, anything just slips straight off the paintwork with a bit of water.

Just a hint if buying Zaino - If you know someone in the US get them to buy and post to you, there's a big price difference. The above cost me around $150 (Zaino only) from the US and was closer to $250 if I bought from Zaino Australia.

post-194-1184622851_thumb.jpg

Cheers

  • 2 weeks later...

Well thats some interesting polish talk.Another thing to add is dont polish in circle's, thats what gives the swirl marks in the first place.The correct way is to go straight up and down,never circles.Think of the way a car gets spray painted.Thats the way polish.

Well thats some interesting polish talk.Another thing to add is dont polish in circle's, thats what gives the swirl marks in the first place.The correct way is to go straight up and down,never circles.Think of the way a car gets spray painted.Thats the way polish.

I would have to disagree with that.. I'm no expert but if you are putting circles (swirls) in your paint when you're polishing you are either using the wrong product or technique. It shouldn't matter what direction you are going in, most buffers/polishers use a circular motion of some sort, but used correctly don't put swirls in.

washing, you are correct, no circles. Also, no OVERLAPPING strokes.

Polishing is a little different, in that with an RO you work in a cross-hatch pattern... but by definition of an RO, it's circular anyway.

If you have a properly cleaned and prepared surface, circular polishing is fine. The main point is to remove the spent polish with a quality MF cloth. Aquatouch being amongst the best. If you have a poor MF cloth to buff off the polish, you could induce swirling.

Washing is where you have to be careful, as that's where the vast majority of swirls/scratches are introduced.

Good point Daniel.. I probably should have explained myself a little further.

Washing is where you will end up swirling the paint most of the time. Here is a link that goes through how to wash a car to try and prevent swirls. I know it sounds a bit silly to watch a guy wash a car but the guy is Mike Philips, who is Administrator for Meguiarsonline and runs meguiars howto classes (he knows what he's talking about). Every little bit of info helps in my opinion so have a look, you'll know some or most of it probably.

http://video.google.com/videoplay?docid=75...owcargarage.com

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...