Jump to content
SAU Community

Recommended Posts

Could i get this VIN number checked please - 6U9000BCNR33024253.

I gave you the Australian VIN number for this car in my last post, which you advised would not be recorded as it is not a genuine Nissan VIN.

The genuine Nissan VIN is BCNR33024253, however I placed "6U9000" before it.

Hopefully it is recorded on the fast software, and it should be a 1996 R33 GTR V-Spec Midnight Purple.

Cheers!

In the FAST software there are 2 boxes; one with the code (BCNR33 in this case), and one with "serial" number (024253 in this case)

So the easy way to represent the VIN is: BCNR33-024253

Anyway here it is:

post-39244-1273018468_thumb.png

Could someone please run this VIN for me?

Also any options fitted?

BCNR33-041755

Cheers

Well the option codes are in the "Model" box on the FAST Screenshot I posted just before, in your case: GGJPRWFR33ZDA-AQ-C

additionally, if you can read Japanese here are the Model-code-to-Options conversion screens:

post-39244-1273019202_thumb.png

The top part is characters 1 through 13 and the bottom bit is 14-18

I marked the options listed in your Model code with little red lines... but most of it is Japanese Characters...

And YES the program is set to English, it just doesn't have translations for options unfortunately...

EDIT: here are my best guesses:

Character 1: Body type, (number of doors) (in this case "G" == 2 door)

Character 2-3: Engine (in this case "GJ" == RB26DETT)

Character 4: Type of drive (in this case "P" == 4WD)

Character 5: NO IDEA, but only one option

Character 6: Spec level (in this case "W" == GTR V or GTR N1)

Character 7: Transmission option (in this "F" == case 5 speed)

Character 8-10: Always "R33"

Character 11: Fuel system?? (in this case, "Z" == I'm not sure)

Character 12: NO IDEA

Character 13: NO IDEA, but only one option

Characters 14 to 18: NO IDEA sorry

hope this helps!

Gaspard

Edited by Gaspard
Well the option codes are in the "Model" box on the FAST Screenshot I posted just before, in your case: GGJPRWFR33ZDA-AQ-C

additionally, if you can read Japanese here are the Model-code-to-Options conversion screens:

post-39244-1273019202_thumb.png

The top part is characters 1 through 13 and the bottom bit is 14-18

I marked the options listed in your Model code with little red lines... but most of it is Japanese Characters...

And YES the program is set to English, it just doesn't have translations for options unfortunately...

EDIT: here are my best guesses:

Character 1: Body type, (number of doors) (in this case "G" == 2 door)

Character 2-3: Engine (in this case "GJ" == RB26DETT)

Character 4: Type of drive (in this case "P" == 4WD)

Character 5: NO IDEA, but only one option

Character 6: Spec level (in this case "W" == GTR V or GTR N1)

Character 7: Transmission option (in this "F" == case 5 speed)

Character 8-10: Always "R33"

Character 11: Fuel system?? (in this case, "Z" == I'm not sure)

Character 12: NO IDEA

Character 13: NO IDEA, but only one option

Characters 14 to 18: NO IDEA sorry

hope this helps!

Gaspard

Thanks mate, Appreciated

hey, if i give you my vin number does this program tell you the engine number?

if so

6u90000ecr3302434

can it please me sent in a private message to me urgently.

private message, why?

I assume you meant: ECR33-002434

here it is:

post-39244-1273054888_thumb.png

From the program we can see it's an R33

Model year: 1993/August

Color code: QM1

Body type: 2K (probably 2 door)

Engine: RB25DET

Steering: HICAS

Driveline: 2WD

Spec level: GTS25T/M

Transmission: Manual 5 Speed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Get something that can spray a bit, something like I'd use is a pressure pack for weed sprayer. I use one with degreaser. Spray it on (make sure you're fully covered up, you don't want that shit on you, especially face/eyes). Alternatively, a paint brush will help here as you can brush and work at the stuff quite aggressively.   Be aware, citric acid can eat metal away and will cause it to rust more later. So make sure you neutralise it when done, and give the fresh metal some protection. That hanger, I'd honestly bin and get something like the Frenchy's drop in replacement. The tank, again, I'd look for something else to replace it with. Remember, as metal turns to rust, it means there's less metal there now. So some patches of your fuel tank are likely to be quite thin.   Personally, Id focus on the front end of things, IE, how did the injectors get clogged if they're meant to be after a fuel filter. Then, once the front is sorted, I'd rig something up, even like a small surge tank, and make sure the engine is now running and all behaving. Then I'd replace the fuel tank and fuel hanger and pump. Also, I'd already be preparing to ditch your fuel filter...  
    • That's looking great! Are you planning to do things like all hidden wiring with it, or you're planning to have it look more like we'd expect an RB in an engine bay to look like?
    • Haha thanks everyone, I'll take everyone's suggestions into consideration. If I do eventually choose a car ill post it here update on the mods I do.
    • I found the ingredients at larger amounts from a Coffee Shop. 1kg Citric Acid for €8.50 500g Baking Soda for €2.50 I tried it out tonight distilled water (I got from my ACs) and dish soap. It does get bubbly with dish soap. In just two hours the hanger has improved significantly and rubbing against any remaining rust seems to flake it off. I'm going to leave it a little bit longer and see how it goes. I have read that someone even used this solution in an ultrasonic cleaner to clean a seized water pump which brought it back to life.
    • If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
×
×
  • Create New...