Jump to content
SAU Community

Recommended Posts

also - does this vin number mean anything as it is associated to the above chassis number:

6T91MPAAAR1BCW004

im not sure why the same car has a different vin number & different chassis number...anyone know why this might be the case?

The top number is its JDM vin it would have come with from the factory, the lower VIN is the one it would have been issued with during compliance for registration in Australia.

that is interesting as 2 other gtr's ive owned never had a different vin for aust registration purposes

that is interesting as 2 other gtr's ive owned never had a different vin for aust registration purposes

Hmm, I was just assuming as it looks similar to the Aus vin my 33 has from compliance. It may depend on when/where it was complied or a whole bunch of other reasons so if someone with more knowledge on the subject could chime in that would be good.

wgnc34-125532

Can you tell me what computer this came with originally?

need to know if its a 0v800 or 0v801

Thank you

That car was originally fitted with a 23710-0V800. (Later models used the 23710-0V801)

  • Like 1

post-78976-0-64957100-1294917673_thumb.jpg

6U900BCNR33006132 please

Hope this works......

Can anyone point me in the right direction for working out the options from the model number, The R32 Im looking at has this model number KBNR32RXFSLMZG

Edited by Bren81

post-78976-0-64957100-1294917673_thumb.jpg

Hope this works......

Can anyone point me in the right direction for working out the options from the model number, The R32 Im looking at has this model number KBNR32RXFSLMZG

Top right of the screen where all the buttons are there is a white and blue one that says OP. Click it for options fitted to vehicle. A lot of older vehicles will show jibberish... newer ones will be in engrish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...