Jump to content
SAU Community

Recommended Posts

Can you please do these too? :)

WGNC34-136534

BNR32-014689

Is there any information on mounted options and if they are some special model?

Seller said the Stagea was Dayz edition and not sure if the Skyline is a genuine Nismo or just has all the parts fitted.

Cheers :)

post-29613-0-08692300-1299108465_thumb.gif

post-29613-0-28591300-1299108469_thumb.gif

i need some help to try an find out a little bit of info about my car NOTE THE BLUE NISSAN BUILD PLATE ON THE FIREWALL WAS REMOVED BEFORE I BOUGHT THE VEHICLE .i would like to know where and what work has been done to my car how many owners ect" the engine number is rb30117488a axle code :r11 vin:6h91mportwhf79096 can anybody help me out with abit of info about my car please ???

i need some help to try an find out a little bit of info about my car NOTE THE BLUE NISSAN BUILD PLATE ON THE FIREWALL WAS REMOVED BEFORE I BOUGHT THE VEHICLE .i would like to know where and what work has been done to my car how many owners ect" the engine number is rb30117488a axle code :r11 vin:6h91mportwhf79096 can anybody help me out with abit of info about my car please ???

You'll need to track down the Nissan chassis number to run it through FAST. It should be physically stamped into the chassis somewhere. Newer Nissans have it on the right hand chassis rail near the RHF wheel. Not sure about older ones though. I'm not sure on the legalities of not having a manufacturers build plate attached to the car, but it might be worth looking into to save trouble down the line.

CHASSIS NO: BCNR33 000358

VIN: 6T91MPV97Y2BFX019

Engine No: RB26700733X

It's meant to be a 1995 R33 GTR V-SPEC silver colour.

See attached. Doesn't appear to be a V-Spec.

post-20417-0-05369200-1299803742_thumb.jpg

Edited by Psymon

You'll need to track down the Nissan chassis number to run it through FAST. It should be physically stamped into the chassis somewhere. Newer Nissans have it on the right hand chassis rail near the RHF wheel. Not sure about older ones though. I'm not sure on the legalities of not having a manufacturers build plate attached to the car, but it might be worth looking into to save trouble down the line.

See attached. Doesn't appear to be a V-Spec.

Thanks for that!

I've just put a deposit down on the below car, so if you could please check this out for me that would be great:

VIN: 6U900BCNR33021482

CHASSIS NO: BCNR33 − 021482

MODEL: GGJPRWFR33ZZAAA—A

It's meant to be a 1996 R33 GTR-VSPEC with KR4 silver

I've just put a deposit down on the below car, so if you could please check this out for me that would be great:

VIN: 6U900BCNR33021482

CHASSIS NO: BCNR33 − 021482

MODEL: GGJPRWFR33ZZAAA—A

It's meant to be a 1996 R33 GTR-VSPEC with KR4 silver

post-63532-0-29606100-1300074253_thumb.jpg

1996

KR4

V-Spec

Hi all,

Could anyone please FAST this VIN for me.

ECR33-102498

Suppose to be '98 model in Wine Red (AR1).

Thanks in advance

Grant

post-63532-0-24797300-1300162633_thumb.jpg

96 model in AR1.

vin- BNR32003522

ENG- RB26021915A

MODEL - R3292A

ANY INFO WOULD BE GREAT THANKS.

WOULD BE GREAT TO FIND OUT THE REAL YEAR OF IT THANKS

post-63532-0-58384400-1300162638_thumb.jpg

November 1989.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...