Jump to content
SAU Community

Recommended Posts

Finally got my compliance plate and registration yesterday.

Been driving non stop since then and the car hasnt let me down. ...Everthing I had hoped for.

Used the Maguires products today and shes come up a treat.

First used soft gel wash

then paint cleaner

then water finish polish

..and will wax it tomorrow

is this the right way to do it? Maguires have got so many products that seem to do similar things.

Was hoping to see some of you tonight so I could have a run. Drove everywhere and couldnt find anyone willing to have a bit of fun.

Be seeing ya

says the one in the very shiny clean polished R33

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/
Share on other sites

am certainly loving it.

Car is a stocker but good things come to those who wait. Im a bit worried about my license though. Its such a smooth and quiet (stock exhaust) car that u dont even realise hoe fast your going. I only have 3 point left and crossing my fingers.

Will post some pics soon (after I wax it)

There IS a question in my first post!

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-241750
Share on other sites

No way that is completely wrong the way you have washed it! you haven't given meguirs enough money that way you need to buy the following and place on in the folowing way

1. shampoo that is a nice yellow colour that gets rid of air of the paint

2. a different class 2 type that gets rid of any left over air from the paint incase you didn't get it off from the 1st wash

3 class 3 air off paint remover

4 car shampoo & wash

5 car shampoo and wash cleaner

6. car shampoo and wash cleaner cleaner

OK honestly i think meguirs is a VERY good product but i really think they have gone over board in there range and are hopping for people like us who car dearly about our cars to buy everyone of their products this i think is all that you need!

1. First used soft gel wash

(2. deep cut polish or swirl remover if your car needs it)

3. finish with Gold class wax/polish

these are the only 3 products i have been using for the past 1. 5 years and works a treat... anything else really is overdoing it. Even my friend who details porsches told me the same!

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-242144
Share on other sites

My car sometimes after starting seems to idle eratically for a few seconds before idling normally.

Does anyone know what might cause this?

ALso how many ks do you guys get out of a full tank when driving at a medium to hard level?. Probab only been getting about 250-300 myself

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-243818
Share on other sites

I dont drive my car hard 100% of the time on average I get 450-500km's out of a tank. I generally change gears at 3000rpm around 90% of the time, whilst 7% is around 5000rpm and the rest around 6500rpm. If you only got 350km's out of a 60l tank, I'd suggest you have been floggin it far too hard, back off or you will do some damage, especially if the car was complianced with cheap oil also are you using BP ultimate98?. I get the same rev problem when starting the car, happens maybe once a fortnight... dunno what it is, could be something to do with the AFM.

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-243900
Share on other sites

Originally posted by rob77

I dont drive my car hard 100% of the time on average I get 450-500km's out of a tank. I generally change gears at 3000rpm around 90% of the time, whilst 7% is around 5000rpm and the rest around 6500rpm. If you only got 350km's out of a 60l tank, I'd suggest you have been floggin it far too hard, back off or you will do some damage, especially if the car was complianced with cheap oil also are you using BP ultimate98?. I get the same rev problem when starting the car, happens maybe once a fortnight... dunno what it is, could be something to do with the AFM.

whats the point in having a turbo if your going to be changing gears at 3000RPM.

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-244503
Share on other sites

ImPrOvIsE, if i drive, and shift at mostly 3000rpm - 4500rpm i'd probably get around 400km out of a tank, depends if you're driving on boost a lot too, be a lot different if you accelerate softly up to 5000rpm without generating much boost, than planting it from low revs to 5k. I have taken it easy for a whole tank before and managed 480km (city driving) and the fuel light had only just come on (sits on E for ages before the fuel light comes on).

paul 6000rpm all the time? how often you change your oil and oil filter?

chris.

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-244518
Share on other sites

Originally posted by ImPrOvIsE

whats the point in having a turbo if your going to be changing gears at 3000RPM.

The point is I like to get good milage and prolong the life of my engine and most of my driving is done going to and from work at peak times. The point of having the turbo is that when its late at night and I want to fang it I can. If you wish to drive like a ****nut and change gears *all* the time around 6000+ rpm go for it. Just dont whinge about your poor mileage. I'll ask my questions again, do you use BP Ultimate 98 and what engine oil was put into the car?

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-244840
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...