Jump to content
SAU Community

Recommended Posts

Got my car dyno'ed today... its been a long time due, and with the issues i had at the recent G1 comp (ignition cutting out) i took with me spares of everything, AFM, CAS, Ignitor etc to swap it over.. but it turns out that the ECU is a bit on the dodgy side

I always thought i had a stock map on my ECU.. but turns out that its been remapped in Japan, whoever did it, certainly likes their taste for fuel, as throughout the whole midrange (4000 - 6000) rpm the fuel mixes were off the scale and mega rich (off the scale being lower then 10:1) Couldnt believe it and neither could jeff... so he went to work taking out all the fuel, adding some timing and so forth. Took a few runs and due to some weird as ECU related issues, we wasted a lot of time and chips and so we were cut short on the dyno time.

My main goal was to increase the midrange torque and so forth, i wasnt really fussed about the top end power as much, as i was happy with that and i didnt want to run anymore boost then i already was. So with the changes to the map we were able to get phernominal torque out of the RB20 around the 4500 rpm range, the KKR430 comes on HARD now and basically the torque curve in 3rd gear is near verticle, in 4th it is equally massive. several times the car tried to climb out the dyno... crazy!

Final figure was 197.4 rwkw's on 1 bar boost, Runs were done in 4th gear.

I have taken pics of the dyno graph, however Jeff is going to be changing this in the very near future to smooth out those midrange mixtures some more.

All in all im very happy with the results.. On the road it basically translates to massive wheel spin when i floor it in 3rd and even more wheelspin when i grab 4th :)

Big thanks to Jeff from The Speed Lab for persisting through all the related ECU and chip drama's and Steve from jazmac for helping out and the Dyno hire.

1003854cm2.th.jpg

Power run showing AF mixes in 4th gear

1003855iv3.th.jpg

Pink is 3rd gear and Red is 4th gear... Keep in mind that power and torque figures are accurate in 4th gear...

Link to comment
https://www.sau.com.au/forums/topic/129817-dyno-run-with-kkr430-turbo/
Share on other sites

Do you want an honest opinion or a pat on the back?

PM me if you want the honest opinion off the forum.

Pat on the back follows;

Looks like a good value for money result.

:D cheers :stupid:

Edited by Sydneykid

From thier own website

KKR-430

Intended for 2.0–2.5L engines, this turbo features a T3-size exhaust flange. This makes it an ideal upgrade turbo for RB20DET and RB25DET engines*. Rated at 430hp, it is suitable for drift and street performance applications, where minimal lag is preferred. It uses a 2.75in V-band flange for the exhaust outlet (V-band and flange included).

Tested on an RB25DET at Panther Aftermarket, it produced 230kW at the wheels with only 11.5psi of boost. The standard internal wastegate is designed to hold 11–12psi.

230rwkw/11psi/rb25 - doubt it

Do you want an honest opinion or a pat on the back?

PM me if you want the honest opinion off the forum.

Pat on the back follows;

Looks like a good value for money result.

:D cheers :stupid:

thats just it, people feel the need to make opinions because its a cheap turbo and bush bearing, but at the end of the day it makes power and it costs bugger all doing it.

wheelspin in 4th with 197rwkw?? Do you have granite tyres?? :D

I was thinking the same thing. I spin in 3rd when planting my 400rwhp datto with 195s and stupid camber......but with 350rwhp I hardly ever did...not to mention the 280rwhp you have. No offence but whats the go?

Get those af ratios to 12 and youll be making more poke.

Well done but do as above and enjoy more power.

I was thinking the same thing. I spin in 3rd when planting my 400rwhp datto with 195s and stupid camber......but with 350rwhp I hardly ever did...not to mention the 280rwhp you have. No offence but whats the go?

Get those af ratios to 12 and youll be making more poke.

Well done but do as above and enjoy more power.

wheelspin is provoked by torque delivery being so sudden rather then peak power figure. and yeah the tyres on the back were a bit average, 235/45/17's however poor quality rubber.

I think that's because it's accelarating from a low speed. If he was at say 4000rpm in 2nd gear even throttle then planted it, the boost would come on quickly after a second or so whereas with a bb turbo it would be more gradual resulting in less wheelspin.

That's how it looks to me anyway. I have driven a car the same as mine with a KKR turbo and that's what it feels like.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...