Jump to content
SAU Community

R32 Gts4 Rear Diff Compatabilty

OREX
 Share

Recommended Posts

OREX Collaborator

OREX

Posted
Posted

Hey guys,

My GTS4 rear diff has started whining at all speeds, getting louder as speed increases. I've been told it could be bearings, or washers etc. but have been quoted up to $1000 for a rebuild.

I placed an ad in the wanted section asking for a used rear diff, but as the gears are 4.375 I'm told they are not the same as the more common GTST or even GTR gears.

So now what I need to know is do any other skylines, stageas, cefiros etc come out with a similar diff, so i can widen my search?

Any info is appreciated.

Cheers,

George.

Link to comment
https://www.sau.com.au/forums/topic/130049-r32-gts4-rear-diff-compatabilty/
Share on other sites
ebola Proficient

ebola

Posted
Posted

The diff ratio in the gts4 is unique (across the r32 range).

How do aftermarket mechanical diffs comapare on price?

Also, I think you can change the ratio of a diff fairly simply... but I could be wrong.

keep us posted on what you do. I for one would like some options when my diff finally goes...

OREX Collaborator

OREX

Posted
  • Author
Posted

Damn it man, unique diff gears? How typical! I've been quoted on a Kaaz mech diff, didn't specify 1 or 2 way, for $1050. I seriously doubt it will be the same gears as the GTS4 then, probably meant for a GTST replacement.

ebola, I like your idea of changing ratios in the same housings, but again, no one I've spoken to has a clue how to quote me on it. I rang one dude "Blind Elk" recommended but he wasn't sure he could fix it. Running really low on options, looking to be cheaper and easier to do a GTR gearbox/diffs combo swap etc.

blind_elk Grand Master

blind_elk

Posted
Posted
...I've been quoted on a Kaaz mech diff, didn't specify 1 or 2 way, for $1050. I seriously doubt it will be the same gears as the GTS4 then, probably meant for a GTST replacement.
I thought that was the centre only - you need to attach your crown wheel and pinion.
Duncan Grand Master

Duncan

Posted
Posted

yeah exactly those diffs are centre only.

In fact you can drop in any diff centre to suit a r200 short nose (all ones since r32)

As long as the noise is not in your crown wheel....but much more likely the centre has problems.

OREX Collaborator

OREX

Posted
  • Author
Posted

So basically what you're both saying, is that I take my diff centre out and swap in a 32 GTST centre, but bolt my drive shafts back on etc and it will be the same ratio?

I thought there was a difference in the gears/number of gear rotations themselves inside the diff centre. If anyone's got an easy way to explain it I'd appreciate it, as I've been offered std. 32 GTST diffs for $330 from a wrecker, so if I can swap parts etc. it will be easy as hell!

Duncan, if the noise is in my crown wheel, then what happens?

blind_elk Grand Master

blind_elk

Posted
Posted

When you open up the (replacement) diff and remove the centre, it will have a crown wheel attached to it. Undo the bolts and remove the crown wheel. Then do the same with your current diff.

Now bolt the crown wheel from your current diff onto the centre from the new diff, and install that centre in your diff housing.

Since you still have the same gears, you have the same ratios.

(It will all be really obvious when you do this)

If it's a problem with the crown wheel and / or pinion, then you are in deep doo-doos. It's probably a trip to the bank to extend your mortgage so you can buy a new set from Nissan!

TurboX Mentor

TurboX

Posted
Posted

Considering thats one thing on my GTS4 that actually is OK (I prey) :mad:

what is the best lubricant to put in there to keep it that way and avoid noise/wear problems?

OREX Collaborator

OREX

Posted
  • Author
Posted

Thanks a lot for that info Blind Elk, I'm going to look for a GTST diff now, is that all I need to do the swap? And also, how will I know if my crown wheel/pinion is damaged?

TurboX- I'm told I should use some oil called "Redline Shockproof" I know nothing about it but a lot of people said to use it.

AzzurrA Grand Master

AzzurrA

Posted
Posted

so, quick question... in my R32 GTS-t, the diff is a bit whiney... so what you're saying is i can get a diff centre from something like an R32 GTR, or R33 GTST/GTR or even an R34 and it will bolt up? do they all have the same amount of splines for the driveshafts, physically the same size etc?

OREX Collaborator

OREX

Posted
  • Author
Posted

Guys I've now seen the R200 short nose with five single bolts, or three double bolts (make sense?)

Are they the same stuff inside, so i can use either R200 with my original crown wheel (assuming it's not stuffed) and pinion gear?

Let me know if I've got it wrong again.

Cheers,

George.

Duncan Grand Master

Duncan

Posted
Posted

Yeah there are differences with the axles.

So, check out if you have the 5 or 6 bolt holes (GTR are 6 not sure about any other ones.) Then you match the axles to the # of bolts on your car and the number of splines in the diff centre you need to use.

As long as it all matches you are in business....but sorry I'm not sure which cars have which driveshafts, axles or spline counts....someone should do an FAQ about it all one day

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
    • MBS206
      Leaking Rear Subframe Bushing?

      By MBS206 · Posted

      Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • Duncan
      Leaking Rear Subframe Bushing?

      By Duncan · Posted

      You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...