Jump to content
SAU Community

Recommended Posts

if u wanna see my sky check out http://www.bebo.com/Profile.jsp?MyProfile=Y oh and ignore the stupid burnout in my vid... it was just for fun i lost my licence and i needed to just screw around for fun in my car since i missed driving it... and if u dont wanna check out my page u can see a pic of my car in my display pic :happy:

too much hazzle to get in,please post the photos.

Here is a couple of my ride, not a big fan of the rims as they came with the car, but my 295's on the back seem to just fit without having to roll them, so i can live with them till they r bold lol,

after chrissy ill be adding alot of bolt on's ive got stored, eg; Lowered springs,Turbo to cat inc high flow cat,

Power FC, high flow turb's, intercooler, waste gate and BOV, and a couple other things on exterior and a couple more for engine....

ill put more pic's up after cheissy when im finished.

prq2.jpg

prq.jpg

dsfq.jpg

Heres my pride and joy. also in the 4 door section.

How I bought it in november 06 From Southside: Stock except for Blitz BOV, Blitz Turbo Timer and 3" Catback exhaust

img9619dk3.th.jpg img9623dn8.th.jpg img9630ot0.th.jpg img9638nc1.th.jpg img9629eq6.th.jpg

How it looks at the moment (poor light, n00b with my digi)

img9753wf9.th.jpg img9756zt0.th.jpg img9757tr3.th.jpg img9768uf3.th.jpg img9781qx4.th.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...