Jump to content
SAU Community

Recommended Posts

Without the grills, there is plastic mountings exposed under the lights which make it look like somethings missing, (but not as bad as gaping holes in the bumper).

The tabs could easily just be cut off though, no probs, and yes they will fit a 2 door.

I put some coupe fogs on for a while. Straight swap.

I cut the grille bits off mine leaving the top section that hides the bolts. The grilles look like anus tbh.

Dunno if I posted this one here, I hope not. It's hard to get new photos when it just sits there.

56644_3419140652128_1357731342_o.jpg

sedan ones look much better but still not a fan personally... making a sort of diffuser/bash plate to follow the shape of the bumper & under the k frame at the moment so not worrying bout the lights, will give me some time to think..

Nice and clean miguelone

i see what you've done there Miguelone. looks like the way to go about it.

Takz ive seen this pic before but could find it again..thanks for the repost so i can have a better look. :) they do look good with the Nismo lip.

That is mad Taks seeing yours and miguelone's may change my mind, no harm in having 2 options.

im loving all of the standard bumpers around here all you seem to see on the street is body kits.

those bumper lights always looked to me like they are upside down...if you were to flip them 180 degrees so the wedge was on the outside and on the bottom it would flow much better with the headlights..Nissan design fault i guess :P

Anus grill user reporting for duty.

grill1355788160.jpg

I ummmed and aarrrred for ages but I think I'm happy I kept em.

Look a lot better on black, tend to look too fiddly on lighter colours imo. Are your guards completely stock or are they pumped slightly?

Look a lot better on black, tend to look too fiddly on lighter colours imo.

That's exactly why I changed my grill from the double slat Sedan style to the single Coupe style. The whole front looked a bit too busy.

Soooooooooo... Dark Anus For The Win !!! Wasn't he the guy in StarWars?

Those ^^^ lights do look kinda nice with the yellow. Is that just tinting put on? Certainly would help to hide the yellow fever.

I need to fix up some cracks in my lip and put it on, but for now, after a fresh wash and complete with anus grills, my baby looks like this...

BlackBettyClean2yrs_zps225f36eb.jpg

nice man very clean, do you like the chrome window trim cos i reckon it would look great in matte black

i know it needs heaps moar low haha, the coilovers are wound down as far as they go, need to get some adjustable tube ones, it still is like 9cm off the ground at the front. but i agree with you it still needs more

i kinda like the unfinished, empty look of the front at the moment, but i change the look so often i will get over it in a week or so and do something new, gotta keep mixing it up.

Edited by PaulosECR33

nice man very clean, do you like the chrome window trim cos i reckon it would look great in matte black

I don't mind the shiny, goes with the rims and fits with the weather shields cause they have it too.

I'm thinking of maybe painting the wheels black instead of the goldy bronze but leave the shiny lip.

If I had all black wheels, maybe the chrome could go black too.

BlackBettyClean2yrs2_zps73d4b375.jpg

Edited by Not a Pulsar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...