Jump to content
SAU Community

Recommended Posts

I'm just doing my Learners course atm and wondering where's the best place to look for bikes to buy and what kind should I get.

I've been told a Suzuki GS500 would be good but I couldn't find any listings for them in the Trading Post.

I'm thinking about 400-600cc and fairly upright ordinary kind of seating position - not a racer.

Is $3-4000 realistic for something reliable?

ta.

Also I see "new sprockets" in a number of adds. How many k's do sprockets last? Are they expensive?

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

your limited to 260cc when learning.

sprockets get replaced..... from my crap memory, with about every second set of tires.

budget... not sure, i dont look at bikes much, but i think you could buy something nice for that. try the trading post, and www.bikepoint.com.au

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422393
Share on other sites

Dont waste cash on a learners bike; just not worth it.

Get a budget 250cc and learn to ride safely, and have fun doing so. A ZZR250 kawazaki would be my suggestion..........and then upgrade once 'ready' to a nice 600/750/900 or dare I say 1ltr&beyond

or do a little research on what Exactly size displacement you can have for singles, twins and 4cyls - something like a Suzuki SV650 v-twin might be legal and a good bike to boot.

all the best with your new life-journey - its been a VERY fulfilling journey for me :laugh:

edit: sprockets are cheap. normal wear & tear item, go by the wear on the teeth :)

Edited by Tangles
Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422404
Share on other sites

I checked this out awhile ago for interest sake.

You are limited to 660 (if over 30 i think which is me :laugh: )

But there's also a specific list of bikes that are allowed too.

You can't pick any 600 CC bike ..eg an R6 is definately off the list.

The list is on the RTA site somewhere.

Shouldn't be too hard to find.

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422486
Share on other sites

I'm just doing my Learners course atm and wondering where's the best place to look for bikes to buy and what kind should I get.

I've been told a Suzuki GS500 would be good but I couldn't find any listings for them in the Trading Post.

I'm thinking about 400-600cc and fairly upright ordinary kind of seating position - not a racer.

Is $3-4000 realistic for something reliable?

ta.

Also I see "new sprockets" in a number of adds. How many k's do sprockets last? Are they expensive?

Bob. If you are an older guy, use the bikes at the riding course. Pay the hire fee. Don't pay lots for your first bike ,maybe even an old rego'd dirt bike because somewhere along the line you will drop it. After you have an unlimited license ride every bike you can demo up to 600's. Take your time and get something you are comfortable with. Build up your experience and do advanced riding courses and ride days.

Don't worry about sprokets and chains ,use a good quality chain lube and regular cleaning and lubing will help the last. Chains, sprockets etc are consumerables they wear out. Take a bike riding mate along with you to try bikes . Also use good helmets and gloves.I'm and older guy and have a Fireblade which I tour on , do track days, etc. I love Phillip Island and the snowies

Good Luck , and remember you WILL come off or be bumped off by some idiot. You will also become a much better driver as well

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422573
Share on other sites

Hey Tangles.

Just rode my cousins brand new GSXR-750 today.

Absolutely brillant.

It makes you remember how pathetic cars are in comparison to a motorbike.

I'm really thinking of getting rid of the r34 and going for another new bike.

Abo Bob, tangles is right don't waste your money on a learners bike. Chances are you'll drop it. And you don't want to spend too much money.

I'm a fan of twins as they don't need to be revved as much so maybe look at a cb250. Or if you want something a little more exciting a Honda Sparda is damn nice. They use the same engine as the VTR250. Only most of them are alot older.

Also when you get your full license don't go for the most expensive bike you can afford. Riding something that is too powerful for you. Will end up making you a worse rider as you will be too scared.

You see lots of wankers that go fast in the straights then slow right down for the corners. And corners are where the fun on a bike.

Have fun, any questions just ask us. And welcome to a new biker.

P.S.

Don't be foolish and say your car is faster then most bikes because you are just embarassing yourself.

A new 600 that can be had for 15,000 and have a 3 year factory warrenty. Will be faster then your line in any corner or drag comp.

Edited by kralster
Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422617
Share on other sites

Nice work ! .... makes me want to go for a ride :)

Seriously, Abo Bob - take a Suzuki Sv650 for a test drive, Im sure its legal for you, and its a VERY good bike. Ive seen a couple of these bikes (in capable hands) do some amazing things...... :laugh: very very stable, predictable, good brakes, top engine, decent suspn but a tad-limited there for adjustments.

Meh - cant have it all when on a budget ! have fun working it all out...... :happy:

ps-read keith code: a twist of the wrist :sorcerer:

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422734
Share on other sites

Being a avid rider myself its good to see some good advice. Can i also add a few points :

If you are buying a first bike, it is always good imho to learn on a 250cc bike, as its a tad easier to get a hang on learning how to ride, and understanding the basics. For example,a 250cc is lighter and easier to control if u have to do an emergency brake etc. I used to lock upand swing my rz250rr rear end a few times too many due to my own stupidity of going too fast :laugh: Fun.

2. No matter what bike u have, ALWAYS get insurance. Same as cars really, but bikes suck for repairs. A fairing piece would be worth 1/2 the bike...no joke :)

3. Never skimp on poor rubber. It can mean the difference in traction if u hit white paint on the road, and its like ice when wet, especially if your lent over a little.

4. Buy leathers and wear them...for gods sake dont look like those knobs riding in shorts and thongs. Ive had a mate get gravel rash from dropping his. They use a stiff bristle brush at the hospital to get all the ashphalt out of your skin...seriously painful ive heard.

5. Maintenance...gotta keep it goin good. :happy:

In SA its learner 250cc resticted on learners and p's. Then p's for 12 months, then open slather on what u want to ride.

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2422745
Share on other sites

SV650's are great.

They look horn (Espically the K3 and new models) They have about 70 hp or so and will do a mid 12 quarter mile.

I just found them to be lacking in the suspension and braking department, but i don't believe you'd be able to tell when you first start riding. Put an exhaust on them and they have a nice V-twin sound.

Also the chassis is a bit to flexible but you'd have to be going rather hard to know that.

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2423086
Share on other sites

Hi Bob

I agree with the sv650 but I don't think that they will be in your pricing range some of the older zzr600 would be a good buy if you could find them for the price though now is the time for looking . Sprockets are not all that expencive chains are, good ones anyway, my sprockets are still the originals and still in new condition after 10,000 klms i beleive regular checking and lubing of the chain prolongs life of both chain and sprockets,you might fint most of the 600 type bikes you try will all feel a bit racey for you being tall .Best of luck finding one they are fun

Cheers Peter

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2423105
Share on other sites

If you are just using it for a commuter, you dont need anything flash, as said a 600cc will do fine, ive had alot of bikes mostly fast 2 strokes and lost my licence alot, they are just too dam quick, I now ride a yamahaha :) 650 vstar, I went for a cruiser because they are good and grunty and this one is shaft drive (I got sick of checking/changing chains) but top speed lets me keep my licence and it looks good, there are so many different types/sizes you can spend alot of time just looking and you have to decide what type you want (commuter, race, cruiser etc) and remember that most car drivers cause bike accidents SO BE AWARE and wear leathers, They do scrub the gravel out with a stiff brush and yes it does hurt.

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2426312
Share on other sites

Re: sprockets

I was under the impression guys changed them to alter the gearing of the bike. You could replace the main sprocket with 1 less teeth and it'd accelerate faster with a commensurate top speed drop.

Adam I had a ZZR250 for a learner bike. Great fun, easy to handle and a very comfortable riding position.

The guys advocating wearing your gear are right on. If it's too hot for leathers it is too hot to ride.

Link to comment
https://www.sau.com.au/forums/topic/130935-bikes/#findComment-2427474
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...