Jump to content
SAU Community

Got Bored Today, Modified Triple Gauge Cluster

walkoau

By walkoau,
in Exterior & Interior Styling

 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
Posted

hey guys, i got a little bored today so i went to the local auto parts store picked up some 2'' gauges (volts and boost) and a shift light, and decided to replace the triple gauge cluster. took the cluster apart and removed the old gauges, the new 2'' gauges fitted in the factory holes easy with no cutting required, i just had to make a face plate up for the shift light. pretty easy low cost mod for those people interested.

thanks

Justin

post-1416-1156140720.jpg

post-1416-1156140861.jpg

post-1416-1156140925.jpg

walkoau Mentor

walkoau

Posted
  • Author
Posted
this is exactly what I want to do, only with Defi link Gauges.

can you take a photo of the back of the unit with the gauges in them now?

will take a pic tommorow for you.

thanks

Justin

walkoau Mentor

walkoau

Posted
  • Author
Posted
didnt you have a oil temp gauge? isnt oil temp more important than battery voltage??

i love seeing people do stuff when bored! good work!

steve

true oil temp is more important, but harder to wire up. i may end up moving the shift light some where else(surgestions anyone?) and put another gauge(oil temp) where the shift light is at the moment.

main reson for changing the cluster was to have a boost gauge capable of reading more than 1bar and to also have a PSI gauge.

i would have loved to put some better gauges in ie. defi but i just dont see the value for money.

thanks

Justin

Shaun O Enthusiast

Shaun O

Posted
Posted

Nice job, hope you have an easy way of turning the shift light off if you use this on the road too because it's gonna piss you right off after a week of driving at night!

VB- Veteran

VB-

Posted
Posted
Nice job, hope you have an easy way of turning the shift light off if you use this on the road too because it's gonna piss you right off after a week of driving at night!

that was my next question, coz now u cant put a cap on it becoz its behind the plastic lens, and those things are really bright i.e. blinding

walkoau Mentor

walkoau

Posted
  • Author
Posted
Are you sure they a 2" gauges? I have several pics of people who did a similar thing and for alot of them, the gauge sticks out, looked like they had to do away with the plastic lens.

yeah the gauges are definetly 2 inch diameter, i think the bezel around the speco gauges are pretty small compared to some other gauges. i only just had room to fit the plastic lens back on, prob only a mm to spare.

walkoau Mentor

walkoau

Posted
  • Author
Posted
Nice job, hope you have an easy way of turning the shift light off if you use this on the road too because it's gonna piss you right off after a week of driving at night!

i only drive the car on the weekends, and hardly ever rev it to 7000rpm(which is what the shift light is set at). the only real time i rev it to that is a the dragstrip.

walkoau Mentor

walkoau

Posted
  • Author
Posted
this is exactly what I want to do, only with Defi link Gauges.

can you take a photo of the back of the unit with the gauges in them now?

hi guys

sorry it took a while to get a pic of the back of the unit, ive been heaps busy. anyway here are the pics of the back of the unit.....

post-1416-1156930610.jpg

post-1416-1156930725.jpg

post-1416-1156930762.jpg

post-1416-1156930796.jpg

mad082 Grand Master

mad082

Posted
Posted

i have a cheap ($180) shift light. its not LED and it doesn't bother me at night. it is all about how high you set them. if you set them at 6500rpm, then you are only going to have it come on when you are fanging it. if you are just driving normal it won't come on.

paulr33 Grand Master

paulr33

Posted
Posted

can you actaully look at the guages legitamtely and concentrate on driving at the same time? i find even looking at the factory clustor takes away my focus on the road ahead for a brief second

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ggub
      WTB RB25 Gearbox NSW / central west

      By ggub · Posted

      Agree with Rob. I recently did mine and replacing with a brand new unit made the most sense compared with rebuilding my existing gearbox.
    • GTSBoy
      Rb25 trigger kit and timing misalignment

      By GTSBoy · Posted

      Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • joshuaho96
      R-chassis INNER tie rod torque spec?

      By joshuaho96 · Posted

      I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • joshuaho96
      Question about BoV on RB25DET NEO

      By joshuaho96 · Posted

      Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • drifter17a
      Rb25 trigger kit and timing misalignment

      By drifter17a · Posted

      Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
×
×
  • Create New...