Jump to content
SAU Community

Recommended Posts

Lovechunks - please avail yourself of the Forum Rules. If you are posting negative comments, do not include business names. Vijay

Hi to anyone who reads this. I just saw a freinds two cars that he had ordered from [name removed] :( To say that they were disapointed would be a masive understatement!

Both cars came in damaged on nearly every panel. One would not even start. Both were heavily modified in all the wrong ways, they were missing parts as well. How they got complianced and registered I don't even want to know.

In the past I have bought in cars of my own and only through a reputabe Auction group or buyer.

I'm not sure these two cars are indicative of all their imports but these cars were definatly NOT sourced from Auction.

I'm surprised they were not crushed in Japan but obviously a Japanese Wrecker maybe? thought he could sell them to some dodgy Australian Asshole for about $500?

So a word of warning, buy at Auction from someone you can trust. If your buying before you see leave a 10% deposit and no more.You have to pay shipping and other duties so why not get a decent car? Don't get taken and end up with a junker.

It really pisses me off to think that my buddy was really excited about his new car then ended up disapointed. He doesnt have enough money to be ripped off on a car. So when some DICK says he can save you a bit of money on an import please think twice :(

Edited by raz0r$harP
Link to comment
https://www.sau.com.au/forums/topic/131402-import/
Share on other sites

Hi to anyone who reads this. I just saw a freinds two cars that he had ordered from ^%$^%& :( To say that they were disapointed would be a masive understatement!

Both cars came in damaged on nearly every panel. One would not even start. Both were modified in all the wrong ways, they were missing parts as well. How they got complianced and registered I don't even want to know.

In the past I have bought in cars of my own and only through a reputabe Auction group or buyer.

I'm not sure these two cars are indicative of all their imports but these cars were definatly NOT sourced from Auction.

I'm surprised they were not crushed in Japan but obviously a Japanese Wrecker maybe? thought he could sell them to some dodgy Australian Asshole for about $500?

So a word of warning, buy at Auction from someone you can trust. If your buying before you see leave a 10% deposit and no more.You have to pay shipping and other duties so why not get a decent car? Don't get taken and end up with a junker.

It really pisses me off to think that my buddy was really excited about his new car then ended up disapointed. He doesnt have enough money to be ripped off on a car. So when some DICK says he can save you a bit of money on an import please think twice :(

Edited by Lovechunks
Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431229
Share on other sites

Looks like you mate was too tight to pay the $250 to get the car mechanically inspected before payment was made. The importer in question doesn’t choose the cars for you, they give you the tools and options to choose what car you want. In the end it was your mate’s decision to choose those 2 cars.

Don’t talk crap about a reputable businesses that help a lot of people out.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431545
Share on other sites

Lol, i didnt pay to have my car inspected, and its fine :D

I chose it, with the importers help, they didnt tell me to buy it.

It ran perfectly the first time i started it before it had been complied, and the only stuff i got done was preventitive maintenance (timing belt, water pump etc) :D

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431551
Share on other sites

I've had to edit the name of the buisness out as per forum rules, sorry. There is nothing more to this story. Some have obviously had good dealings with the company which is great. But having said that you can take the above as a cautionary tale, that not all dealings are perfect, far from it.

The person who bought these cars is a good honest person who picked two cars from $%$#%^'s contacts and was sold lemons. Not every buyer knows what they are doing and he may have been a little nieve but he was shown pictures and given a report on both vehicles while they were in Japan, he then handed over money and got crap!

So a word to the unwise. Be extremly carefull.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431744
Share on other sites

I insinuated that thats how much the car probably cost in Japan to buy from some dodgy dealer. Most cars this bad are crushed in Japan. When the 15 year old import rule came in some enterprising people dicided to keep a lot of bad cars that otherwise would have been crushed. Mx5's Celsior's R32's Rx7 etc. I know of a few that were for sale for around $500-$1000. Really cheap! They were then bought over here and sold for market value which was a decent profit.

The above friend payed very good money for his car and still got a lemon.

Why didnt you research on the business before buying a car??

Why don't you read the post before commenting??

Edited by Lovechunks
Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431781
Share on other sites

huh? what do you mean there's nothing more to the story, there's bugger all you've told us other than the cars were "crap"? What cars are they? What grade were they from auction? how much did they pay in yen? They may have paid bugger all and gotten what they paid for.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431884
Share on other sites

I have just spoken to a representative from #%^%#$# and am sending them pic's and details from both the cars. They seem eager to sort this mess out as am I. I probably shouldn't say anything else until they have seen what I'm complaining about, he seemed pretty nice on the phone. Will tell you how it turns out.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2432993
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...