Jump to content
SAU Community

Recommended Posts

Hey guys,

just a quick question on a car. My mate have bought a car (and is now in vic) from nsw, it is a mr2 mk1 supercharged. Now it was reg'd in NSW, doesnt have a compliance plate, or a vin stamped on the body. Now VIC rta wont change the rego over due to the lack of these two things.

Now i was hoping you guys could give me some advice to pass onto my friend, ie:what happens now, best way to clear it up....

thanks again

Todd

Link to comment
https://www.sau.com.au/forums/topic/131657-no-compliance-plate/
Share on other sites

AW11's would have come in under 15 year rule, so no compliance plate is issued.

It should have a VIN on the body or rivetted onto a plate and an import approval for when it was imported though. If it dosen't have a VIN stamped on there, then take it to a VACC workshop and give them the old reg papers and the import approval. The VIN of the car is usually 6U90000XXXXXXXXXX where the X's are made up using the car's original japanese VIN (which is less than the required 17 for the australian system). In any case the import approval should have your original VIN and your australian VIN (as this document is the link). The workshop should be able to stamp your car if the documents are all in order.

funnily enough the last 2 cars I imported and had complied under the 15yo rule both HAD compliance plates issued, and affixed to the body, and both had a seperate little plate with the new aussie full VIN.

hey guys thanks for the quick response,

my mate has an old rego paper from nsw from it was last reg'd with the vin number on it, but he cant find a vin on the car. So he has the new aussie for the veh, but its not stamped on the car.

So a) if he cant get the import approval what is the best thing to do

and b) will just rego papers with the vin on it be worth anything??

Thanks again

DOTARS can issue a copy of the import approval if you need that. I would be surprised if one state accepted another state's rego when the actual car doesn't prove what it is.

Every car is AUS needs an AUS Vin before it is registered, even my rally import car has one RALLYxxxxxxxxx

15 yr old imports aren't regulated on a national level like the SEVS scheme, so the rules are pretty adhoc and at the discretion of the registry/workshop.

Even the rules for compliance vary between states and engineers... eg in VIC you don't need to change the seatbelts, you can retain 15 yr old japanese rubbish, wheras in NSW you have to turf em and get the ugly taxi buckles.

when i took my ceffy in to reg it in NSW (having been complianced in VIC) with all the right paperwork, I was told to go see a engineer on the list they had, and he told me I needed to change my seatbelts, even though the car already had been registered in another state and had registration history for over a year.

It is not too odd for vehicle imported under the old 15yr rule not to have a new VIN issued, as this was only needed for vehicles manufactured from 1989. It is acually quite uncommon as there was only a 2yr window for this to happen.

However your vehicle should have some sort of engineers’ plate riveted to the chassis, usually in the engine bay. Or at least an engineers' report stating the work done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...