Jump to content
SAU Community

Reputable (gtr) Workshops

95_GTR

By 95_GTR,
in New South Wales

 Share

Recommended Posts

gtr jason Rising Star

gtr jason

Posted
Posted
Blah Blah Blah

Let me guess, you didnt bother to go back to them or call them and give them the chance to resolve the problems?

Regarding your boost issue, obviously UAS had a concern about putting any more boost through your engine - would you have preferred them to just wind it up anyway and run the risk of possible engine damage? Come on

mate if you had got your car done with me and there was a problem i would hope you would bring it back so we could sort out the problem because if you didnt and then started talking shit about my workers they would track you down and give you some shit so you should watch what you say i sure john would have taken another look at it for you if you had of given him the chance

Blitz Grand Master

Blitz

Posted
Posted
mate if you had got your car done with me and there was a problem i would hope you would bring it back so we could sort out the problem because if you didnt and then started talking shit about my workers they would track you down and give you some shit so you should watch what you say i sure john would have taken another look at it for you if you had of given him the chance

I should hope your post isnt directed at me Jason, you might want to watch who you quote in your posts :)

wateva Collaborator

wateva

Posted
Posted

Hey everyone i wasnt trying to stir shit, just adding my opinion on a workshop. I did speak to john in person about the problem. I wasnt happy, he wasnt happy and i told him then and there that i would never recommend UAS to anyone. Im surprised a newb to your forums could cause such a fuss people. :P

GoldZilla Grand Master

GoldZilla

Posted
Posted
Hey everyone i wasnt trying to stir shit, just adding my opinion on a workshop. I did speak to john in person about the problem. I wasnt happy, he wasnt happy and i told him then and there that i would never recommend UAS to anyone. Im surprised a newb to your forums could cause such a fuss people. :P

That's right - it's most likely because of the fact that you are new to these forums that you've only received a caution.

Put it this way, if someone uses these forums to say something negative against a business, that business could sue the forum OWNER for defamation, and if that happens the forums may well be shut down as a consequence, and then we ALL suffer... We've built up a good community, and in many cases a new network of friends both online and outside in the real world - lets help it stay that way.

Beer Baron Grand Master

Beer Baron

Posted
Posted
Hey everyone i wasnt trying to stir shit, just adding my opinion on a workshop. I did speak to john in person about the problem. I wasnt happy, he wasnt happy and i told him then and there that i would never recommend UAS to anyone. Im surprised a newb to your forums could cause such a fuss people. :)

it doesn't really matter to me whether you were intentionally trying to stir shit or not. you posted up half a negative story and named a business. I've explained to you that it was against the rules. You either learn from this, or you do it again and I will come down on top of you like a 16 year old virgin on top of Angelina Jolie.

John being a business owner with a reputation that was hard earned and hard to protect has done the right thing and contacted you to see what your exact problem is. So if there is still some issue, then contact him back and resolve it. If not just accept it and move on. The very fact the he asked me to leave your (potentially damaging) comments on an open forum and actually wanted to resolve your problem should indicate to anyone that he owns a workshop worth using.

Anyway, let's all get past it shall we?

Boosted Zed Mentor

Boosted Zed

Posted
Posted
it doesn't really matter to me whether you were intentionally trying to stir shit or not. you posted up half a negative story and named a business. I've explained to you that it was against the rules. You either learn from this, or you do it again and I will come down on top of you like a 16 year old virgin on top of Angelina Jolie.

John being a business owner with a reputation that was hard earned and hard to protect has done the right thing and contacted you to see what your exact problem is. So if there is still some issue, then contact him back and resolve it. If not just accept it and move on. The very fact the he asked me to leave your (potentially damaging) comments on an open forum and actually wanted to resolve your problem should indicate to anyone that he owns a workshop worth using.

Anyway, let's all get past it shall we?

I don't have a problem with someone not recommending or warning others if genuine and preferably consistent poor service but not if exaggerated. Also if one person at a business as seems in this case a mechanic and years ago it seems then it does not mean that business is not good for ever more. I do not know who you are but I have sent a PM to Wateva to find out who and what and where years ago so I can at least see what happened or did not happen. Wateva you wonder why some are taking your post as aggressive or possibly over the top and not asked for anyway but rather where to go. If we were stealing form you or actually doing really bodgy work and did not want to do anything about it then different. It is so rare even though we do some very technical difficult work one can bank on some not understanding or taking things the wrong way or as mentioned can't be pleased. I can't comment on this case at all as I said I don't know who Wateva is or his car and years ago and probably a few thousand Skylines later. I know I always try and do the right thing by customer to the point where I regularly get handles but give customer the benefit of the doubt and warrant and cover costs I am sure few workshops would.

Tell us who you are or PM me with rego details and name and I look up what terrible thing we did.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...