Jump to content
SAU Community

Recommended Posts

man seriously darK i think something is wrong with u. this whole thred was about finding out which is better....when the hell did i say i prefer branded over non branded for performance.....i only said i know from mates telln me they have no problems and love their exhausts (which happen to be branded).

damnet this forum pisses me off sometimes :(

10 bux says someones gonna get me for wat i jsut said......**cough**cough** admins :/

It's all the same shit.

Japanese people don't have access to special kinds of magical mufflers that increase power.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

I would go jap brand any time of the day. Their mufflers are JASMA approved which is much like ADR in australia. Mufflers are much higher quality and most are quieter than ur xforce, supercat etc...

There is a reason why people pay so much more for a jap brand. Although having said that..if you want to pay upwards of 2K for a CES full system which is tried and tested, you'll probably be happy too. each to their own budget.

part1: noname - save ya $$$

hell, its a round hollow metal pipe, generally around 3inches in diameter.............. brand name means nothing IMO. youd be paying extra $$ for R&D into the muffler design (and yeah they've all been copied by now).

part 2: the search function works perfectly well.

Hey Hi emsta2003,

just noticed that you said you have a turst PE2, have you had it tested for how loud it is? I was thinking of getting one later on.

I just got defected for my exhaust 93db at 3200rpm.

thanks

Michael

most cat backs are the same imo - but I have heard that jap brand catbacks have been tested much better than the no name catbacks. I got a trust pe2 - main reason was that it was very quiet - and once i did get it installed - it sounded fantastic and the response on the car is much much better :)

If you want a huge rumbling noise type cat back - then go with xforce or blitz nur spec - i have heard them on a silvia and a chaser respectively - and all i could say was its way too loud for my liking....

Street car? Just get whatever. I had a noname stainless steel exhaust, HKS copy split dump, noname pipe to high flow cat, unknown pipe, angle ground and welded trust muffler (by me).. oh and before the muffler I asked a muffler shop to put in a resonator.

A grumbly but respectable throaty car just a touch under 200rwkw.

Point is it doesn't much matter, just get a good one of either, not a crap one of either.... Of course, I'd be making another "team I need $" muffler :)

IMO, i believe both are exhausts whether branded or not. They are either made of stainless steel or mild steel. However as one of the members have said, the Japanese Brands ( Eg, HKS, Blitz, Apex-I ) might have better welding and things like that. I really doubt that matters much actually.

Hey Hi emsta2003,

just noticed that you said you have a turst PE2, have you had it tested for how loud it is? I was thinking of getting one later on.

I just got defected for my exhaust 93db at 3200rpm.

thanks

Michael

Hey bud - havent tested it, but had it running next to another jasma approved exhaust (on another 'line) and I also had compared it against a rex - and its very very quiet - I think when I asked around I was qouted it at 93db - but it sounds much much lower than that...

I suppose because im a non-turbo :huh:...........that it wont really apply to you (post maker) but i have 2 1/4 inch cat back with a 5" fat boy pro sitting out the rear of my ride. It sounds great, not too loud, a great klow tone at low revs which eases off as you hit 100 -120kms. Havent been defected and i have freinds who are cops which say that my ride is all good (as far as Db's are concerned).

Ohhh and for brand stuff, if your in adelaide AAA exhausts did a great job, no brand name stuff from the cat and the fatboy pro......didnt know much about it before the purchase but it looked awesome and yeah sounds great!!!!

Regards Evan

Edited by EMZ R33
Although having said that..if you want to pay upwards of 2K for a CES full system which is tried and tested, you'll probably be happy too. each to their own budget.

Try 2K for just custom front pipes and dumps from CES, yeah right id pay that :huh:

Sorry for the double reply but thought id setup a few pics of the exhaust instead of just talking bout it.

Also thought id put this one up too, took it the other day and thought it was a great shot!!!

Ohhhh, and i paid $270 for the AAA Exhausts cat back system and another $170 for the fatboy with instalation

Total $440!!!

IMG_2519.jpg

All the best, here are some links

http://i21.photobucket.com/albums/b258/EMZR33/IMG_2523.jpg

http://i21.photobucket.com/albums/b258/EMZR33/IMG_2533.jpg

http://i21.photobucket.com/albums/b258/EMZR33/IMG_2524.jpg

Regards Evan

Edited by EMZ R33
It's all the same shit.

Japanese people don't have access to special kinds of magical mufflers that increase power.

but they do have access to larger than 3" off-the-shelf mufflers that you can't get here. That is a big advantage for some cars.

AAA are no doubt one of the best in Adelaide. With their own mandrel bending machine, they make their cat backs 1 piece. They are great blokes to deal with.

Good call Busky2k, AAA were great to me and my ride and although i didnt get my system mandrel bend (if thats the term to use) it still flows and sounds sharp, clear and clean. And yeah, they took my whole setup off my R33 and made it on their garage floor then BANG, straight on!!!! My hat off to the team.

Also i should mention Profix at Hilton for the cannon fitting, they were great to deal with as well, and if you dont already know from my "Cruise for a Cause" posting/ event in S.A they are providing a free sercvice and tune for the best car on the day. Please click on the link at the bottom of my posting for more info!!!!

Regards Evan

Edited by EMZ R33
It's all the same shit.

Japanese people don't have access to special kinds of magical mufflers that increase power.

maybe so but they probz been in the business more then any other country when it comes to this stuff.....and that counts for something.....i dunno..........maybe im better off trying a non branded and see hwo ti goes....save myself a few hundred

Edited by anDru

Hey guys a lil off topic, but i was thinking about getting this Blitz Nur Spec R Cat back for my line, its pretty cheap on nengun.com, but the only thing holding me back is that it says its loud throaty noise.

Wondering has anyone had experiance with this cat back? Is it actually really loud when driving normally, droney etc?

Thanks!

http://www.nengun.com/catalogue/product/718

Thats a link

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...