Jump to content
SAU Community

Recommended Posts

as in title, I want to know if anyone had managed to make a sub box with 2 x 15" subs fit in the boot of their R33. I may be buying someones entire stereo system and just wanted to know if anyones done it successfully before. I have asked him for dimensions but he hasn't got back to me yet and I may be able to get a smaller or differnetly chaped box made up anyway

thanks guys / girls

Luke

lol! each to their own. i don't see how a bassy sound system would be horrible. I think 'horrible' is what my stock standard factory system sounds like.

why would you want such an over kill of a stereo in the first place? It would sound horrible

How is it bassy? Where will you be sitting or standing when you are listening to it?

Did you know that a 63Hz sound wave (roughly the frequency of a kick drum) takes about 4.8 metres to travel so if you are any closer than that to the speakers you wont hear it.

as in title, I want to know if anyone had managed to make a sub box with 2 x 15" subs fit in the boot of their R33. I may be buying someones entire stereo system and just wanted to know if anyones done it successfully before. I have asked him for dimensions but he hasn't got back to me yet and I may be able to get a smaller or differnetly chaped box made up anyway

thanks guys / girls

Luke

Hi there,

I have an R33 series 1 4door, now i think that they are the same size boot as the coupe. You will probbably have a lot of trouble mounting 2 x 15 subs in behind the rear seat unless you sacrafice a lot of boot space. If you don't use your boot it should be easy. However i think that 2 x 12s would be much better. The difference that you would actually hear between 12s and 15s is very minimal. I mean on paper the 15s go deeper and rattle the car appart more. I have had 2 15s and 2 12s in my old car and the 12s were much better because they have a higher respons and better sound. (my opinion.) If you get something like Rockford Fosgate our soundstream you really would only need one 12. They are insane. However i can understand the need for symetry i.e 2 subs.

You will ahve to consider what amp you are going to use aswell. You should always overpower speakers so that your amps dont work so hard. By overpower o dont mean run them into thr ground i mean supply them with more power than they need.

Thats just my 20 cents. I have gone through a few stereos, but like i said before each to their own.

:(

How is it bassy? Where will you be sitting or standing when you are listening to it?

Did you know that a 63Hz sound wave (roughly the frequency of a kick drum) takes about 4.8 metres to travel so if you are any closer than that to the speakers you wont hear it.

In a car you will hear it, because the sound bounces around the car. You are right though, but that is more the case in a hall or big room. A human ear cant hear below 20-25hz or higher than 15khz (some exeptions) so when you buy a speaker that is rated to below 25hz it will just shake everything :(

they will fit but you will have to have the box leaned back probably greater than 45 degrees.

in my 32 the box is at about this angle to fit under the boot lid for a 12 inch sub.

the bigger the sub the further it will have to be angled back.

i dont know how much higher a 33 boot is than a 32 boot though.

you will most likely have to custom make a box

thanks for all the comments guys.

I would not usually be looking at 2x15"s but it was just a good looking deal I came across. I have previously had either 2x 10" subs or 1 x 12" to give me the kick I needed. I still might lean towards the single quality 12" over 2 subs as I will need some boot space left for the groceries!

any recommendations on a killer 12"? I have heard the Alpine Type R are decent but I must admit to not having much knowledge of models / brands...

I have a Focal sub.......on rails(8") fitted to my gtr33.

Fits nicely in the corner without taking up much room.

You really for 2 * 15 Inch subs should look at a custom job.

Get a good installer to quote you.

You will take advantage of the dead space in the inside of the boot this way.

Cheers.

Give me a couple of days and I should have part of my guide up for making a fiberglass sub enclosure.

I'm using a 15inch that I had for my previous car because I could be bothered selling it and buying a new one. It sits in one of the back corners of the boot. Pretty much the area I masking taped off in the attached pic. Just repeat for the other side of the boot and your set. You'll lose access to your jack though if you don't make them removeable.

post-28866-1157620156.jpg

check out sondstream for amps and subs, they are disturbing

i think there are a few on ebay for a really good price $300-400

im getting a 4 chan picaso soon =)~~

MA audio have a few good subs too

hey guys i got 2 10" comp subs in the boot of my sky, like the dude with the taped up areas showing where boxes go i got some pics of mine, ignore the fact that i havent finished carpeting the necessary areas. i have also shifted my jack to behind the extinguisher u can see in the pics, there is a small door cut out, check it out. i could have put 12" in but i kept my 10" comp subs instead and they still rattle the tits off the skyline.

only 1 hint of advice is that u remove the old standard car amp, in boot next to battery mounted to underside of parcel shelf and redo all the stereo wires, clearer sound.

post-31466-1157878268.jpg

post-31466-1157878279.jpg

post-31466-1157878289.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...