Jump to content
SAU Community

Gb: R32, R33, R34 Skyline Carbon Fibre And Fibreglass Bits


Recommended Posts

  • Replies 272
  • Created
  • Last Reply

Top Posters In This Topic

post-19974-1157729909.jpg

One for the R32s - GTST wide fender moulds to make your ride into a GTR (or something like that) - price unknown.

Stan put me down for the next batch of bonnet lips when you get the minimum amount of orders, or if one of the first 3 drop out. ;)

Cheers,

Andy

I've already asked for a list of prices for the parts - will post them up ASAP.

Andy; you might get lucky if not there is a lot of interest so they might just make another batch.

BTW; all those guys who have been sent PMs with final pricing for the first GB lot; please make payments ASAP so I can get the order off!

Cheers to n15m0 and Slats who have paid already... waiting on a couple more payments and the first order is ready to go!

Yes I know - a million PMs about R33 stuff :) Unfortunately the R33 is not very popular where these guys are . . . which is very very strange!

Much CF stuff for R32. Take it that the bot lid and CF stuff is CF over fibreglass.

would like a CF front lip for R32 GTR and other bits

My guy has taken one of the last Carbon Fibre R34 Eyelids (as pictured) - they won't be making anymore of these anytime soon. I would have em on my car but I don't have a CF bonnet - if anyone with a car that suits is interested; let me know - can get these over along with the first order.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...