Jump to content
SAU Community

Recommended Posts

i went to tint a car....far out they want 280 for 2 windows screw that.

primier tinting wasnt even open the losers...when it says they should be.

i need some more info on this VIP tinting

buy a membership and get it done through the club and it will still be cheaper than anywhere you go around $220. my 2 cents :D

Link to comment
https://www.sau.com.au/forums/topic/134544-window-tinting/#findComment-2501647
Share on other sites

id rather do my research then just become a member to find out its not dat great.

turns out i have tinted glass not windows......and its real dark

im trying to match that....with tint but its just to dark so something neeeds to be done.....

and i dont know if this VIP can even do it.

wat did other 34 owners do...did ur cars come with dark glass?

Link to comment
https://www.sau.com.au/forums/topic/134544-window-tinting/#findComment-2501663
Share on other sites

id rather do my research then just become a member to find out its not dat great.

?

Well why are you posting here?

www.yellowpages.com.au

I think this will aid your research far more than posting on a forum... which (incidentally) has all the information if you cared to use the search button :sorcerer:

Link to comment
https://www.sau.com.au/forums/topic/134544-window-tinting/#findComment-2501670
Share on other sites

id rather do my research then just become a member to find out its not dat great.

turns out i have tinted glass not windows......and its real dark

im trying to match that....with tint but its just to dark so something neeeds to be done.....

and i dont know if this VIP can even do it.

wat did other 34 owners do...did ur cars come with dark glass?

I own a R34 GT-T Sedan and all the sedans I have seen come with dark window tin on the rear window, back seat windows and then the front seat windows are not tinted.

I was looking at getting them tinted but figured the dark tint on the back is prob. illegal darkness in oz to be put on the front.

Drew.

Link to comment
https://www.sau.com.au/forums/topic/134544-window-tinting/#findComment-2501846
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...