Jump to content
SAU Community

Recommended Posts

Sorry was going to post this earlier but had to watch Top Gear first :laugh: .

Up until Sunday i thought I had a run of the mill std R33 turbo, Until I tried to fit a split dump pipe and found that it wasn't going to fit.....damn!

About 18 months ago I had the turbo highflowed by GCG from 51.2/71mm to 56.3/76mm, and they never said a thing about it [the fact that it wasn't a std one]. It is a ball bearing water and oil turbo with steel wheels and I can get 240rwkw before cams on 18psi, so its probably a good turbo - but all else is a mystery.

Things to note:

The back flange of the turbo has the wastegate dump valve spindle going through it.

The actuator has a recessed face, should be flat.

The arm is adjustable.

And now some pics............

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/
Share on other sites

alrighty :D

you jave garrett housings both compressor and turbine

your compressor housing is A/R 60

your turbine housing has a bolted on wastegate adapter plate.

so it goes:

Garrett Turbine housing/Captive wastegate plate adapter/Dump pipe.

I would give GCG a call and ask them what sort of dump suits.

Alternativly take off the dump pipe and trace the flange on paper and get the shape.

The only thing is you will prob need to get one custom made as it will be to long if you use a pre fabbed one :thumbsup:

Looks like a fairly large turbine housing too :O

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2507592
Share on other sites

Thanks Cef11e, I sort of new a bit of this [you can see garrett and the A/R 0.60 on the front of the compressor housing, and I knew only too bl##dy well that I had an inbuilt wastegate spindle on the back flange ggrrr......but other than that, I had no idea. I already have a non std dump on it - but not a split dump - it sort of looks like they used the top and bottom flange and welded it to a length of 90mm pipe with the appropriate bend in it. Its well made, I was just going to try a split dump - - because I could - - till I found out I couldn't lol.

It's nice to have someone answer that can supply me with the correct terminology though. And the size and type helps, maybe I don't need to upgrade my turbo at all now, I might have a good enough one as it is for the moment [was looking at a 2835proS].

BTW I have an apexi 90mm front pipe [and HKS hyper system].

PS I didn't know, because I've actually never seen a std turbo.............the joys of isolation in the country

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2507628
Share on other sites

good to see that you have nutted it out.

Yeah, thanks to Cef11e, but, still really don't know what its good for yet, probably be an all right thing. Doesn't appear to be any worse than a std hiflo one, question now is 'Can it be Better'. Guess I'll get the answers to that when I get the cams tuned by Ed on the dyno.

if it runs out of puff then its no good, but (and I think this will be the case) if it continues to make good power and gives a healthy increase then it will be sweet. When I was resetting my evc I saw boost levels of 1.8-2.0 bar so I'm optimistic the turbo can deliver [i backed off real quick from those boost spikes, worried about engine damage etc].

Thanks for the help everyone!

And Steve and JaiJai if you go and have a look at the turbo results for other cars in the Forced Induction section you will see that what my car is making is about std run of the mill stuff for a highflow. i looked through several pages and most hiflo gtst's are doing about what I am and with similar boost, or doing commensurately less with less boost.

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2511790
Share on other sites

And Steve and JaiJai if you go and have a look at the turbo results for other cars in the Forced Induction section you will see that what my car is making is about std run of the mill stuff for a highflow. i looked through several pages and most hiflo gtst's are doing about what I am and with similar boost, or doing commensurately less with less boost.

Well yeah like I said not having a dig or anything pal, just seemed like a lot of boost to me. Then again i've got a very different set up, never really did much with my std turbo and havent really seen a highflow in action. And to top it all of yours is neither of the two! So i've no idea what im on about haha.

What computer are your running? And presumably stock internals? Whats it like to drive? Lag a factor?

Edited by Stevie
Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512233
Share on other sites

Nah, its all Ok, you made me think twice........so I went searching and looking for comparisons, and thats pretty much what I came up with [R33 turbo results forum].

Mines a highflow..............just don't know what highflow....lol

Power fc, stock internals, drives fine, boost starts at around 2700-3000 and hits harder at 3500-4000. PM'd you.

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512342
Share on other sites

I have a turbo that looks very similar to your turbo, but with a larger turbine housing. From memory I think is a 0.63.

Either way, I have the same swing valve/dump pipe combo.

Your options as far as the dump is concearned are to either "high flow" your existing dump, which I had done at Liverpool exhaust in Sydney for $300. Or you could buy an off the shelf item from the USA, check out www.atpturbo.com. Neither option will split your exhaust gases as I was told that it was not possible with this flange???

When riging around tell the exhaust shop that your dump flange is similar to a VL turbo and they will understand. I found that most places in Sydney don't want to touch them and I only went to Liverpool as a last resort.

I am getting 1 - 1.5 more psi than before high flowing the dump, although I did fit a batmbl 5" cat at the same time to replace my 3" high flow.

Before the upgrade I was getting 240rwkw at 16psi

Cheers

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512388
Share on other sites

yeah, I should qualify my initial 243 at 18psi by saying that - that is the setting I have dialed in on my evc.

When looked at on the dyno printout I make 16psi, I don't get to 18.

And Gigolo are you happy with your turbo?

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512438
Share on other sites

Sounds good, how may $$$$ you talking about? [as I here him running away in the distance].

On second thoughts, just buy a 2835proS or GTRS and bring it down with you and we'll have a deal!!!

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512614
Share on other sites

hehe no i don't think my budget permits me to do anything after my latest purchase... :happy:

Sounds good, how may $$$$ you talking about? [as I here him running away in the distance].

On second thoughts, just buy a 2835proS or GTRS and bring it down with you and we'll have a deal!!!

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512713
Share on other sites

No Idea Danny on your turbs, though

Find it interesting when comparisons are made about Turbo's and set ups. It's nice to have a comparisons but there appears to many variances in results due to all the other factors. Note the thread in NSW where ppl list there build and rwkw or hp. eg 18 PSI 305rwkw's all depends on the build and bolt ons down to the tune.

Bottom line is if your smiling while your driving thats good enuff. Like everyone I'd like to have enuff grunt that i'm too scared to use it all.

Link to comment
https://www.sau.com.au/forums/topic/134853-my-stery-turbo/#findComment-2512888
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...