Jump to content
SAU Community

Recommended Posts

Hi all,

This is my first post so if this is the wrong place, please dont be to harsh.

On monday, i bought my first Skyline.. An R34 =). I NEVER smile, but since turning off the TRC and mashing it too the floor (supervised conditions..) no ones been able to wipe the smile off my face!

I used to drive a V8 Soarer, though still have my TT soarer, i got sick of the slugishness of the thing and splurged, though i was crying when i handed the keys over. It's mind blowing what ive missed out on..

Anyhow, i have a few question's to ask..

1- On the dash when i insert the key to 4 position, it says "SLIP" i understand this is in relation to the LSD though why does it have a warning sensor? or is it in regard to the trc?

2- How difficult is it to take apart the dash to install a cd player? Do we have a guide?

3- Does anyone recomend any sequential BOV's?

Heres some pics,

It has HKS suspension, 18" Volk mags, Nismo Exhaust and Nismo Bodykit with rear high wing.

post-29335-1158826260.jpg

post-29335-1158826307.jpg

post-29335-1158826367.jpg

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/
Share on other sites

yar i think it might be similar, i pulled out my stereo today from my r33

try taking out the ashtray and looking for a screw, after you have done that the gear surround comes out and you undo 2 or 4 more screws near the headdeck the dash comes loose with a bit aof a nudge and hey presto.

yeah man seriously that wing is cacti, i would remove it asap for a more refined look........apart from that f**ken nice car man! enjoy

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2517197
Share on other sites

1- On the dash when i insert the key to 4 position, it says "SLIP" i understand this is in relation to the LSD though why does it have a warning sensor? or is it in regard to the trc?

That is the traction control. If you switch the TCS off via the button left of your steering wheel, and mash it around the corner it won't display that anymore.. and you'll probably get some fish tail action going :)

2- How difficult is it to take apart the dash to install a cd player? Do we have a guide?

1. Remove the one screw under the ashtray.

2. Remove the center console (using a soft cloth over a flathead screw driver, push underneath the side where there is the handbrake and it should pop out.

3. Remove the aircon vents (using a soft cloth over a flathead on the left hand side, push in and pop out)

4. The cage is now exposed. Unscrew the four screws and pop out cage as whole.

5. Remove the headunit, and connect up. (you'll need a nissan diversity to standard antenna adaptor, and you can get the wiring harnesses from aerpro if you don't want to solder and chop wires.. see my other thread).

I think the wing would look great if u could remove the sides on it. Sweet ride mate

Get the wing off totally. You'll see how bad it is without the sides, it looks a too short to look decent and it ends too abruptly.

See the other thread about how to remove the spoiler, there will be extensive panel repair and respray work involved.

Other than that, enjoy your ride, it looks great mate.

Edited by Howie
Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2517384
Share on other sites

Looks fckn hawt mate.. Though, must agree with everyone above, get rid of that spoiler.

Just curious.. where did you buy/how much did it set you back if you dont mind?

I got it from JapLink Motors On Parramatta road, they have some pretty hot cars on the lot. She cost 27K but i only paid 17 because of my soarer trade in.

I was thinking about removing the side wings and just keeping the rear, but ive been quoted $400 for the patch up job... abit pricey atm.

Thanks for your support guys

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2518130
Share on other sites

thats nice colour dude (same as mine)

I have the R34 GTT also with Nismo body kit only i have the smaller wing

have a look at some of the smaller wings the big ones draw way to much attention (the wrong type)

Im about to tackle the stereo install aswell ,mine shit itself the other day now the down button dont work

hope it is that simple

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2529791
Share on other sites

Nice ride mate. Either remove the wing completely and patch the holes or leave it on. Don't remove just the sides as it will look worse!

If you leave it on, get some shit hot jap wheels...will take ppls attention of the wing :no:

Welcome, the forum is a wealth of information...start by using the search function.

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2529911
Share on other sites

I was thinking about removing the side wings and just keeping the rear, but ive been quoted $400 for the patch up job... abit pricey atm.

$400 ? Damn that is cheap I got quoted 600 to 800 for a good job, its a pain in the arse to weld all those holes and respray the rear quaters. But in the end you wouldnt want a dodgy job cause quite abit of work is needed.

http://www.r34gtt.net/r34howtoradio.html <-- heres the step by step guide for installing the deck.

Nice car by the way mate.

Since we on same subject anyone have a pic of the nismo spoiler with the sides off ? Cause I rekon it might look better then the current state, just dun have enuff to get another one atm :D .

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2535329
Share on other sites

it cost more than $400 to do a proper job.. $400 prolly just bog the holes and do loacl paint job...whatever stuff they plug the hole with may fall trhough.....proper weld job cost more..I was actually quoted $1700...which I think is a rip off....

Link to comment
https://www.sau.com.au/forums/topic/135337-hello-im-new/#findComment-2551302
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...