Jump to content
SAU Community

Recommended Posts

first of all. what is your budget and application.

then work from there.

your options are:

- drop in a motor from a turbo model

- turbo your current motor

as to the differences between a gtr and gtst:

the answer is heaps....

2.6L twin turbo with attessa vs. 2.5L turbo rwd

different brakes, interior, body shape

list goes on...

do a little research, and search through the forums and internet... try the search button up top on this forum.

It's not worth it to turbo your na unless you really want to. There have been many threads on this. you'd be better off dropping in a turbo motor.

Also, aftermarket turbo on an na motor is also probably even worse. the na motor is probably only good for 7-8psi (stock turbo) since it's a high comopression motor. There's no point gettign a big turbo if you will only end up running 1 psi to have it flow the same as the stock turbo at 8psi (it won't even run at 1psi anyways).

It's not worth it to turbo your na unless you really want to. There have been many threads on this. you'd be better off dropping in a turbo motor.

Also, aftermarket turbo on an na motor is also probably even worse. the na motor is probably only good for 7-8psi (stock turbo) since it's a high comopression motor. There's no point gettign a big turbo if you will only end up running 1 psi to have it flow the same as the stock turbo at 8psi (it won't even run at 1psi anyways).

A bigger turbo spools at more user-friendly revs, a guy I knew had a TO4E on his high-comp R34 and it spooled like the stock turbo. Stock turbo's on high-comp engines tend to be pushing 7psi at 1800rpm, it's awesome around town though, tons of torque low-down.

Cant you just lower the compression ratio of the engine?

My parents mechanic told me that i could throw a hks stage 1 turbo kit straight on and you just have to adjust the engine to be able to run it.

Cause im after an r33 gts25 as well for my first car, And im concidering doing this once im off my p's

Edited by OBNXSH
Cant you just lower the compression ratio of the engine?

My parents mechanic told me that i could throw a hks stage 1 turbo kit straight on and you just have to adjust the engine to be able to run it.

Cause im after an r33 gts25 as well for my first car, And im concidering doing this once im off my p's

its not something you can adjust like timing, you'll have to throw in a thicker head gasket or swap pistons.

and even then you will still only be able to run mild boost without doing more work.

that said how old are you? QLD govt. is implementing the P plater restrictions soon (as you probably already know) and by the time you get onto your P's you may not want a skyline anymore. at the current price of skylines its much easier (and costs roughly around the same) to sell and buy a GTST

its not something you can adjust like timing, you'll have to throw in a thicker head gasket or swap pistons.

and even then you will still only be able to run mild boost without doing more work.

that said how old are you? QLD govt. is implementing the P plater restrictions soon (as you probably already know) and by the time you get onto your P's you may not want a skyline anymore. at the current price of skylines its much easier (and costs roughly around the same) to sell and buy a GTST

I know all about the p plater restrictions i have the pain in the ass memorised. I get my P's in less then a year. Ive been set on a late 90's model c200 mercedes or an r33 as long as i can remember, And the mercedes is a little out of my price range so i wanna settle with an N/A skyline and in the future work on it, Money really isnt an object for me so if that is the main reason why people say to not convert the engine, Is there any other reasons as to not do it disregarding money? Plus n/a skylines ive looked at have been roughly 8 - 10k and importers have quoted me roughly the same price...

Edited by OBNXSH
Money really isnt an object for me

if only we were all so lucky....

reasons to do the conversion it:

- you might already have a bodykit on your skyline

- stereo install

- small dress up bits, custom bits,

- rims

- suspension work

reasons not to do it:

- brakes will need upgrading

- a standard RB25DET is made to take the power

- a DET motor you can be looking at 200rwkw or more on standards

- much less customization

- gearbox

its all common sense really... if you do a search you can find your answers

talk's cheap. for someone who cant even drive yet you are certainly thinking very far ahead... i suggest you get your license and then go from there.

by the time you get your p's turbo 33's will probably be cheap enough for you to buy 1, but you won't legally be able to drive it.

if you want a NA skyline as your first car then get that. then once you are off your p's either sell it and buy a turbo skyline, or drop the motor out and put a turbo motor in. here are some of the mods you have to do-

buy the turbo, intercooler and piping, and manifolds and exhaust

buy a new clutch

get a thicker headgasket put on

get a new ecu (to have it run well)

new fuel pump

have oil and water lines drilled into the head

now if you go an aftermarket turbo setup, you are looking at $2500-$3000 just for the turbo, which is the same money as a turbo front cut. but the turbo motor will handle much higher amounts of boost. an the boost you could run on the NA motor with a turbo, you probably would only just make it to the power of a stock turbo motor, if you were lucky.

Just get a shit car for your first car, save up and get something nice once youve crashed it and are off your Ps.

You will scratch it up, you dont want a nice car for your first car and you sure as hell don't want a fast car.

if money isnt a problem how can the c200 be out of your price range?

The type of c200's i want, In the condition i want are 22 - 26k.

Just get a shit car for your first car, save up and get something nice once youve crashed it and are off your Ps.

You will scratch it up, you dont want a nice car for your first car and you sure as hell don't want a fast car.

Bit to late bought a 33 yesterday...

Im not to fussed about a turbo or not i was just saying thats was what the mechanic dude said.. Ill probly buy a merc once im off my p's. Lol i dont really care about how fast it goes :D

Edited by OBNXSH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...