Jump to content
SAU Community

Recommended Posts

James and Snowy spoke to him at Dutton and he will be joining up and coming to the show and shine from what I know.

James will clarify that though.

Iheard maybe the Autosalon stand..... its a maybe..

NOVEMBER

3/4/5 Fri/Sat/Sun – Melbourne Autosalon Semi Finals – MEMBERS ONLY

7 Tues - 11 Sat - SAU Takes on Sydney - Motorsport Road Trip to NSW - Click Here

18 Sat – DECA Motorkhana Day - Shepparton

21 Tues – SAU Vic General Meeting – 8.00pm - Bells Hotel, Sth. Melbourne

23 Thurs - SAU Vic Pizza Night

26 Sun- Christmas Party & Annual Show N Shine Day – MEMBERS ONLY

I talked to him not too long ago, he said he's very busy with his other clubs but is looking into the SAU membership :happy:

We spoke to the driver at Dutton VIC, and as he is a motorsport enthusiast he was more interested in things like DECA, rather than Autosalon. But we shall let him make up his own mind.

Great to hear it will actually be driven

I was at OranPark when it had its first outing after being imported - it has some niiiiice speed, and sounds awesome!

Make sure if you see it with the bonnet up you guys check the airbox, and if you see it sitting around, have a look at the diff setup - its well worth lying on the road for :happy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...