Jump to content
SAU Community

Recommended Posts

Im curious to know if what ive read and been told is bullshit or not. A bloke with a r33 gtst with a rb26 in it with alot of work done reckons with two hks gtxxxx or something arather rated at 360hp each can make 544rwkws or 730hp on a simple and conservative 1.2bar. Assume it has all supporting mods, mild camshafts(done @ tighe cams), std valves, port n polish(course finish, not polished), std manifolds in & out, a fairly thick metal hg, assume cr 8:1, running pump bp 98, motec m800.

I admit my understanding on twin setups like those in gtrs im unfamiliar with but turbos are turbos regardless, to me that amount of power is not accurate. Can anyone explain it or explain their setups if similar and what power they make. Perhaps offer some explanation for it. Not only that but the car can do 1:14s around the national track @ QR and incase people dont know v8 supercars do 1:12-1:13's commonly with quickest time recorded a 1:10 by tander. Whether thats accurate or not i cant say, its only what ive heard.

Im annoyed a little bit that the guy bagged our setup and why his is so perfect is what i want to know cause i cant see it being soo good. This is a information seeking mission but also venting my annoyance.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/136148-730rwhp-possible-with-twins-rb26/
Share on other sites

If you are referring to low mount turbos, then indeed you've been told rubbish and a simple check of the RB26 Turbo Upgrade thread stickied in this section would have answered your question.

I'm running the largest HKS-GTRS terbs (largest low mounts from HKS) on a fairly seriously built motor and can only achieve mid 500s rwhp.

See:

http://www.skylinesaustralia.com/forums/in...t&p=2137700

Cheers

Gav

Ive been through the 26 section before and seen the power figures...thats why i think its all bull. But i figured well just incase he has a heavier worked motor then say most others and thats why hes achieved that power or something out of the oridinary.

Gav what power are the GTRS rated at?

Obviously different dynos will give different power whether shootout mode or not and so on.

Gav what power are the GTRS rated at?

HKS rates them at 400PS each

Gav: What sort of boost were you running to produce ~550rwhp? Sounds like something is holding you back if thats the most you can squeeze out of them

Im curious to know if what ive read and been told is bullshit or not. A bloke with a r33 gtst with a rb26 in it with alot of work done reckons with two hks gtxxxx or something arather rated at 360hp each can make 544rwkws or 730hp on a simple and conservative 1.2bar. Assume it has all supporting mods, mild camshafts(done @ tighe cams), std valves, port n polish(course finish, not polished), std manifolds in & out, a fairly thick metal hg, assume cr 8:1, running pump bp 98, motec m800.

I admit my understanding on twin setups like those in gtrs im unfamiliar with but turbos are turbos regardless, to me that amount of power is not accurate. Can anyone explain it or explain their setups if similar and what power they make. Perhaps offer some explanation for it. Not only that but the car can do 1:14s around the national track @ QR and incase people dont know v8 supercars do 1:12-1:13's commonly with quickest time recorded a 1:10 by tander. Whether thats accurate or not i cant say, its only what ive heard.

Im annoyed a little bit that the guy bagged our setup and why his is so perfect is what i want to know cause i cant see it being soo good. This is a information seeking mission but also venting my annoyance.

Cheers.

Over 500rwkw on 1.2 bar? I highly doubt that :)

try another tuner gav and u might be suprised ;) with that setup and gtr-s and 28psi i'd expect more. :)

sell the gt rs turbos and go for a single HKS Z and u will need half the boost for the same power :)

Edited by CruiseLiner

no chance @ 1.2bar

thats all really :)

It could be possibly with the biggest trust offerings, but not pissy 360hp huffers.

dirtgarage made the power on race fuel dont forget, and around 370-380 on pulp which is the norm for 2530's...

IMO Gav, 2.8l + 28psi and every other nice bit of fruit... it doesnt equal 550rwhp unless something is severly holding you back

try another tuner gav and u might be suprised ;) with that setup and gtr-s and 28psi i'd expect more. :)

sell the gt rs turbos and go for a single HKS Z and u will need half the boost for the same power :)

No - the dyno numbers that I'm producing on the GT-RS terbs are about right compared with others.

I believe DirtGarages's numbers (which are much higher than I've seen others publish) weren't produced on pump fuel from memory (correct me if I'm wrong).

Agree that the single T04Z is indeed a nice bit of kit, but now that I'm set up with the low mounts I'll stay with them. Presently fitting longer duration exhaust cam which should extend the top end some without hopefully not losing too much low down. Very little experimenting with cam timing so far, so should be interesting with some more dyno time.

EDIT: posted at the same time as R31Nismoid regarding race fuel.

The terbs and fuel system are set up for mid 500s awhp, so I really don't feel like I'm being "held back". The extra good bits are really just for reliability and longevity.

What the dyno graph doesn't really convey is the very broad spread of torque available which is what I set out to achieve - the main use being track days and motokhanas.

Cheers

Gav

Edited by Gav

pnblight is making those numbers almost (530-540hp from memory) with 2560r turbos and 2.6L bottom end and it aint on 28psi i know that much. and thats on pump fuel too

dirt garage's rb26 was on race fuel yes.

are u running 28psi with pump fuel???

Edited by CruiseLiner
pnblight is making those numbers almost (530-540hp from memory) with 2560r turbos and 2.6L bottom end and it aint on 28psi i know that much. and thats on pump fuel too

dirt garage's rb26 was on race fuel yes.

are u running 28psi with pump fuel???

I've only tried pump fuel.

Unfortunately haven't had the opportunity to catch up with Pete (pnblight) and go for a spin yet - hope to early next year when I'm back.

Did drive Adrian's JUN 2.7L with 25/30s fitted. Much of a muchness in response although I did feel that I had a greater top end.

Simon's 2.6L with the Garrett TO4Z is just nuts. Suprisingly, Not much difference in response but just crazy top end response.

' date='27 Sep 2006, 07:58 AM' post='2531990']

doing dyno runs the last few days on a top secret car, big mods, and a t88-38k, 22 psi, 432rwkw. oh by the way, did anyone say lag ?

next step is to bottle it so the boost comes on quicker ! boo yah

Hardly surprising when the car is running a T88-38GK on a standard capacity RB26.

' date='27 Sep 2006, 07:58 AM' post='2531990']

doing dyno runs the last few days on a top secret car, big mods, and a t88-38k, 22 psi, 432rwkw. oh by the way, did anyone say lag ?

next step is to bottle it so the boost comes on quicker ! boo yah

that is very interesting but doesn't really have anything to do with this thread now does it? hardly ground breaking news. a T88 GK makes 400kw!!!!111

I think some of you other guys need to let go of your stranglehold on dyno numbers. every dyno is different. if Gav is happy with his power and build then why keep poking at it? i would say his engine build would be one of the more serious ones on here so i dont think it's a matter of him having skimped on it. I don't know of many other HKS 2.8 litre strokers running GT-RS turbos kicking around aus.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...