Jump to content
SAU Community

Batmbl Gb #3: Twin/split Dump & Front Pipes In One + 3" Hi-flow Catco Cats (optional)


Recommended Posts

SoFly,

The bulk of the parts were delivered yesterday evening and many will get sent out midday tomorrow. You will get your items on Friday since you are in Sydney. Anyone thats not in Sydney will likely get their items on Monday onwards. Most pipes/cats will be sent tomorrow, and some on Friday and Monday next week. I will update the list tomorrow regarding which member's parts were sent out and continue to update it until all have been sent.

Thank you all for being so patient.

cheers guys

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

any1 have trouble fittin the r34 split pipes? the end where it connects to the cat curves up too much, it lifted my catback too high and its grinding on the body of my cat........needed to cut that curve section off and rewelded a straight pipe instead of curvy

hi guys,

I apologise for the delay in getting the rest of the pipes/cats out early this week. Its been a nightmare getting them to me since they are being made one by one interstate and the delivery of these parts will come in one hit. Ive been promised delivery of all the remaining pipes and cats in the GB tomorrow (should have been monday!!!), so i will get them all packaged and sent out on Thursday and update the list on the 2nd post of this thread. Again i apologise for the inconvenience this causes to some.

cheers

any1 have trouble fittin the r34 split pipes? the end where it connects to the cat curves up too much, it lifted my catback too high and its grinding on the body of my cat........needed to cut that curve section off and rewelded a straight pipe instead of curvy

Yes same problem with mine (R34 sedan). Very snug fit but tilts up too much at the cat end and flang touches heat shield where cat sits. Also the rear bracket is slighly off and only one hole aligns. Will it make a difference if this heat sheild is removed? Or is it recommended to keep this shield behind the cat only??

But is does look like it will fit when this problem is fixed.

Also snapped off top bolt in turbo exhaust manifold :D any suggestion how to remove this without removing the turbo to do so??

Help appreciated. :D

Hi all,

Just thought I'd post that I got a stainless split front/dump and metal cat from Michael a few months ago in one of the other group buys. Finally fitted it on Friday.

Very impressed, there has been a noticable increase in power, it spools louder and it seems that there is none of the choking at high rpm like before (used to feel like the engine was struggling to breath at high rpm)

Installed easily, only two issues - needed to go and buy new bolts for the cat - as the r32 gtst cat bolts are studs with threaded holes. and had to replace one of the bolts that goes into the turbo with a shorter bolt, as i couldnt fit the original one back in as the wastegate pipe was in the way. Other than that easy as install...

Rhett

hmm... i've finally paid for my split pipe, not too keen on this "not fitting quite right" business :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...