Jump to content
SAU Community

Recommended Posts

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

Edited by R3sp3ct
Link to comment
https://www.sau.com.au/forums/topic/137244-wtb-wheels-for-the-track/
Share on other sites

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

I HAVE SOME.. :happy:

17 x 9 front and 17 x 10 rear with tyres... will sell them to you for $350 plus deliv, im in tassie, these would be great for track, they are the perfect offset for teh r33 as they are on mine... no spacers needed... have a look

let me know

the pic of my car is availbel if you follow the link

http://www.skylinesaustralia.com/forums/in...howtopic=134504

Hi hi,

Im still after wheels as the other ones fell through.

Prefere anything around 255, i want width!

yeah sorry about that, im getting them repaired though, but like you said "you could find something for that price and not need to worry about the price."

My rims were 17x9 and 17x10 and have yokohama rubber on them and i was selling them to him for $400 delivered....

if anyone has somethign similiar for a similiar price then help this bloke out...

Beef

Hi,

I have a very track worthy set of rims and tyres

I know these fit GTST's perfectly as a few of them are using these rims on our trackdays :D

Also im selling them with semi slicks so you're ready to get out there and have some fun

Link is below for you

Oh, maybe i didnt say it correctly, its rims and semi slicks for that price

The tyres are worth around $300 each, and have easily 85% left on them

So the rims are actually VERY cheap there

But if thats not your thing, no worries

I have some s15 stock wheel with bridgestone re540's on them. Two of the tyres are almost dead but would be fine if you run lots of camber (scrubbed on outside) but the other two are about 70% tread. After $450 which is what they cost me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...