Jump to content
SAU Community

Recommended Posts

240Z pilot October 9th, 2006 10:05 PM Link

I guarantee this car will be significantly HEAVIER than the “7 litre us tank” referred to! Z06 Corvette weighs in at 3150 lb., this will be at least 3400. I’d bet money it will also be SLOWER around any race track.

To tell the truth, I’d rather see a new Silvia (which we haven’t had in the U.S. since ‘98)!

This thing is a bit “much of muchness” imho.

Less is more!

;)

idiots...

Theres another thread posted recently with pics of the car without the car bra and hiding stuff but I think it is still labeled as the prototype.

http://www.skylinesaustralia.com/forums/in...007+skyline+gtr

Drew.

:P idiots...

Its not that much of a stretch of the imagination.

The current Z06 runs a 7:43 around the Nurburgring Nordschleife. That's significantly faster than a 996 Turbo, a 415hp / 3800lb AWD car with a purpose-built chassis and a lot of money thrown into performance R&D.

That said, I don't think Nissan will be happy with the GT-R until it holds the lap record for a "reasonable" production car (I don't count the Radical SR8 as "reasonable", even though technically it is a production car). And the 996 is a generation old, now, but I don't have the times for the 997 Turbo. It should have cracked the 40's by now, since the old 996 Turbo / light tune R34 ran a 7:51 or so.

I think the next GT-R will be quicker than the Z06 on the track, but given the sheer pace of the Z06 its not going to be your typical "AWD turbo terror vs Yank Tank" battle, especially in the hands of drivers who know how to make a car go around a track fast.

The real thing looks the goods thats for sure.

The one problem I can see with this is, nissan isnt seen as a premium brand, therefore the people with the money are going to be hard pressed to justify spending the dollars to buy it, as it doesnt have the 'badge'. Because really a clubman will go around a track as quick as a porka at a fraction of the cost, and a VK with a worked V8 in it will go in a straight line faster at a fraction of the cost. But the people with the money wouldnt do that as they dont have the badge. Ones a mechano set the other is well a commodoore.

But yeah, good luck to it. Its definately got all the good gear.

people still thinking it's a Skyline after it's been explained it's NOT a million times, others thinking there is going to be a V8 for the US market only? no... they're idiots :)

Other sites are linking to 2005-dated information saying it'll be badged Infiniti over there as well.

Its almost the end of 2006, for Christ's sake.

I love it how people are still quoting the info I posted from back in 2004:

http://www.leftlanenews.com/2006/10/09/spi...08-nissan-gt-r/

Rumours have indicated the car will feature a 3.2 liter twin turbo V6 engine with 480hp.
I think the next GT-R will be quicker than the Z06 on the track, but given the sheer pace of the Z06 its not going to be your typical "AWD turbo terror vs Yank Tank" battle, especially in the hands of drivers who know how to make a car go around a track fast.

Which lets face it, isnt most americans who think in 1/4mile and not much else, guess theres the handful of people outside of NASCAR that actually know how too turn right as well as left.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...