Jump to content
SAU Community

Recommended Posts

My mate with a R34 GT-T noticed some severe misfiring after giving his car some stick on a hot day. We pulled the sparkies and I almost had a heart attack... and this is how 5 of the 6 looked. :rant:

sparkiejs4.th.jpg

Changed em and the car runs fine now. Its a miracle the porcelain/metallic bits didnt seem to damage the ceramic turbine or valves. Then again I haven't done a compression test since. Is this guy lucky or what!! :( No I didn't create this thread to bag out my mate, just to show you guys what kind of damage detonation can do and how easy it is to loose a motor.

Link to comment
https://www.sau.com.au/forums/topic/138463-detonation-damage/
Share on other sites

Hes probably gonna have some nice chips out of the crowns of those pistons, probably off the exhaust side. When the heat gets too high the coatings can come off any of the fancy plugs, especially if you regap them yourself. coppers for the win.

did u turn the motor over once with each plug out to blow crap that might be left in there out of each bore? A piece of spark plug could cause pre ignition if its inside the camber...

When i pulled apart my old motor it had small bits of crap floating inside, ontop of each piston...

IMO if this was caused by detonation, it would be very unlikely to have done 5 sparkplugs, as i would have thought detonation would be more prone in one perticular cylinder, then the next. By the time you have 5 cylinders detonating, something would break. Is it possible the fuel pump is on its way out, causing lean mixtures hence far higher combustion temps causing spark plug melting and detonation. Just my 2c, correct me if im wrong

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
×
×
  • Create New...