Jump to content
SAU Community

Recommended Posts

This recent sydney heat has had an impact on the smooth/responsive feel of my car.

Obviously 9psi boost has turned into more like 7 or 8 due to the heat, which i expected.

I'm using the stock intercooler (R33 - 3inch full exhaust - pod - turbotech set at 9psi)

The car has stalled on cold start 3 times on the 3 recent hot days, and the idle was playing up a bit while driving, dropping way too low (will look into cleaning aac valve soon).

Also, the car seemed alot less responsive, less willing to pick up on demand, kind of running rougher.

Never had any of these issues before the heat. Since it's cooled down again, everything seems fine.

My question: Is all this related to the hot weather? If so, will a fmic fix this?

Link to comment
https://www.sau.com.au/forums/topic/139057-is-the-hot-weather-to-blame/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

yeh, in hot weather my line turns into a freggin corolla.

lol great, take one skyline, some extreme heat, mix together vigorously, and you get one corolla.

what about the stalling? my car always starts first go, i barely have to look at the key and it's rumbling nicely.

but the last time (sat), i was cranking it over forever, and on the 4th attempt it started.

i had a cooler on my 33 and went throught the same shit munkeh... so i have a two part answer to your question:

a) cooler makes little, to no difference on start up problems... and

b) you should have a cooler anyways, can runs so much better with one

turboz just dont like the heat... i used to find that on really hot days, it just didnt have the low down pull i usually had

an intercooler wont help you much at all. its just going to act as a heat soaker when your in traffic. since your in sydney, this would be more then likely the case. on that note, my car also feels like poo lately especially in the 30+ degree's we've had here in the last few days.

k, well i feel a bit better now, knowing you're all suffering with me :(

so you reckon the cold start problems might have been related to the heat. maybe from the previous day's heat abuse or something?

best way to get decent performance in summer is a waterspray intercooler jet. I have had great sucess with this.

I had a cefiro a couple of years ago that was set up for drift and saw a lot of track work in summer and it was also my daily driver.

I had a temp probe lust before the throttle body to measuer intake temps.

When I first got the car in summer with the stock cooler I saw temps of 60deg + then I put the FMIC on and saw an drop of about 10 to 15 deg.

but I was getting pinging on really hot days. so I decided to fit a waterspray system. All it really was was a windscreen washer motor/bottle with a hose going to the front of the cooler that directed 4 water mist nozzles on the front of the cooler. It had a check valve to stop it from siphoning out of the washer bottle. It was triggered by a pressure switch from an old washing machine that was set to 4psi.

As soon as you started to boost it the system would switch on and spray water in a fine mist onto the cooler. It was amazing it dropped intake temps to about 5 to 10 deg above ambient. and stopped the engine from pinging. I am going to do the same mod this summer on my new car and will do a writeup for those interested. All up it cost about $70 for the patrs and a bit of fiddling but its a really good mod. you just have to remember to fill up the bottle every time you fill the car as it only lasts for about a 300k's with spirited driving on a small scource.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...