Jump to content
SAU Community

Recommended Posts

Hi All,

I thought i would come to the experts. My RB20 is coming along nicely with a APEXI AVC-R boost controller, fuel pump, coil packs, air induction and full exhaust system and I love the results. On the weekend however I put on a new BOV and I noticed my oil pressure idleing is just above the zero and when boosting wont go above 2 (which is a quarter of the maximum 8). Why is this and would it be due to the BOV? Also how can this be tested or fixed.

I appreciate any help as I have not come across this before.

Link to comment
https://www.sau.com.au/forums/topic/139833-oil-pressure-low-on-my-rb20/
Share on other sites

Hi All,

I thought i would come to the experts. My RB20 is coming along nicely with a APEXI AVC-R boost controller, fuel pump, coil packs, air induction and full exhaust system and I love the results. On the weekend however I put on a new BOV and I noticed my oil pressure idleing is just above the zero and when boosting wont go above 2 (which is a quarter of the maximum 8). Why is this and would it be due to the BOV? Also how can this be tested or fixed.

I appreciate any help as I have not come across this before.

the senders normally whack out... but in my case i think my oil pump is screwed because the top end is making horrible noises.

I have an Autometer gauge which has replaced the stock oil pressure warning light sensor. It reads in PSI so i dont know if it will be any help to you but i use a 10-40 Motul oil in my RB20DET which is basically stock, on cold start i get around 60-70psi of oil pressure at idle, after around 5-10mins of driving it will read around 6-15psi of pressure at idle and rise to a max of around 45-50psi at 3000rpm when hot.

stupid question, but will pressure vary b/w oil?

i just changed my oil from a motul 4100 turbolite 10w-40 to motul 8100 xcess 5w-40 and ive noticed a pressure drop once the oil is warm. Previously it would sit close to 4 on the guage and no it doesnt rise above 2 once warm..

should i get a different oil?

engine is an rb20det btw

i got custom gauges put in, and my car on 15-50 mobil one, reads about 70 cold, and about 40 @ 3000rpm, but ideling it sits between 20-15 psi should i be worried can suply photos.

Note: mine did the whole read jsut above zero never gets above 2 thing, so i went out a put customs in

- to answer your comment, get ur mechanic to do an oil pressure test on it, and i would recommend getting aftermarket gauges, and leave the BOV out of it.

55yko

Edited by 55yko

as long as the oil pressure warning light is not illumminated, then all is ok

the stock oil pressure sender is dodgy on all nissan imports and won't give you anything even close to the correct pressure...

i recently installed an aftermarket gauge in my glovebox and find that:

when warm at idle it sits between 1-2bar

when warm and cruising/driving the oil pressure varies with rpm (can't see this on the stock gauge) and sits up around the 3-4bar area

obviously pressures are much higher when the oil is cold

gauge cost me $20 (ebay)

gauge cup $5 (ebay)

sandwich plate $30 (justjap)

not a bad investment and is hidden in the glovebox nicely :(

cheers,

Warren

My stock guage is all over the place.

Some days it reads like it should, others barly above the 0.

Its always been like that though, even with the old motor.

Quite funny actually as I've caught it going from crappy to normal.

Cruising along at 100km/h, oil pressure sitting on around .5 then all of a sudden with a sharp jolt the needly flicks up to just over 4 which is where it sits when the guage is playing nice, sat there for the next few days then decided to go gar gar again.

Wouldn't be too concerned. RB20's are cheap anyway, drive it until she starts making funny noises.

Guilt Toy.... I'd say your lifter problem was likely attributed to poor oil pressure. As I'm sure you already know. :P

Thanks for all your help everyone. I'm just going to drive the bloody thing and have a mind set that the oil pressure gauge is faulty. If it goes boom I will just chuck a RB25 in it anyway as I planned on doing next year anyway.

hi im wondering if anyone could help me on a simalr topic?

i have a problem with my rb26 regarding with the oil pressure, everytime i hit high revs or hit boost the oil pressure goes down to 0 and the warning light will turn on.

if i drive normally without going over 4-5000rpm its ok, the pressure doesnt drop and the warning light does not turn on.

i would appreciate any help thanks.

cheers,

hi im wondering if anyone could help me on a simalr topic?

i have a problem with my rb26 regarding with the oil pressure, everytime i hit high revs or hit boost the oil pressure goes down to 0 and the warning light will turn on.

if i drive normally without going over 4-5000rpm its ok, the pressure doesnt drop and the warning light does not turn on.

i would appreciate any help thanks.

cheers,

Jesus, stop driving it on boost. High revs + no oil pressure = boom, as said above the warning light almost always does work. It could just be low on oil and getting starved under decent Gs (accel, cornering) check the level and if its really low do a change, otherwise it could be the pump itself but definately check it out before you do any more damage. Also there can be problems with excessive oil getting to the head but I don't really know much about this topic. Probably be wise to check the oil and see if theres any bearing matter in it as well (silver sparkles)

Edited by Rolls

will the engine die straight away if your on boost with no oil pressure?

or is it more of a wearing of the engine until it dies?

i think ive been hitting boost with no oil pressure

hopefully its just a tired guage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...