Jump to content
SAU Community

Recommended Posts

Nulon is supposed to be good for the price. But I'm undecided at the moment. I've used Castrol Edge before, but didn't really like it. Hard to explain but the car just felt nicer when I went back to Motul

Got 5000km before I need to service it again, with work and the amount I drive that will probably be near 6 months away lol. Plenty of time to decide what I want to use

If anyone has a complete RB25 head that they want to offload for cheap let me know also

The car ran a PB on 9.58 @ 144mph with a 60ft of 1.4sec which i am pretty happy with. Willowbank will be the proving ground of its true potential. 0.5sec is what i am guess-ta-mating we will gain on track condition with the same 800hp tune at the moment which gives us a 9.0sec and Mark thinks that with a healthy tune on 36psi should get us the 8.7 - 8.8sec which will give us the record we have set out to achieve. Fastest Street Tyre H-Pattern GTR, but baby steps first as long as the car goes faster every time we drive it is always an achievement which is what it has been doing which at the end of the day is all we want.

The car is impressing us every time we run, we do very minimal changes and gain huge results which gives us massive satisfaction. The car is still full bodied all steel panels still only carbon bonnet at the moment and we have heaps of things to lighten the car up but at this point in time are just not needed, like carbon doors, carbon boot, remove intercooler, carbon brake rotors, Weld drag rims, Lexan windows, exhaust removal, interior strip etc. Which would gives us an easy 100KG + lighter.

The car also had its first major component failure, but was to be expected as it cops the brute force and shock load and has done over 40 odd drag launches and numerous dyno runs, and if you have ever owned a GTR the clutch does not last very long if you keep doing hard 4wd Launches. The engine and gearbox was removed yesterday and the clutch was sent straight to Doug at NPC to get overhauled and modified even stronger to full drag specification. While the engine is out we will check everything to make sure it is 110% before it heads of to Jambo. Bring it on I say :woot:.

IMG_0159.jpg

IMG_0158.jpg

IMG_0157.jpg

Ben, that just means he didn't launch it hard enough :P

I just want a rough daily that goes fast, and looks ok, and has most of the annoying mods done. Not sure if I like red though.

What do you guys think of this? http://www.ebay.com....9#ht_500wt_1414

Trying to find something that isn't full of kebab wrappers if you know what I mean.

Edited by The Mafia

That's nice, i like that red Jono.

Nice work ben, just out of curiosity who would be best to see about gearbox issues? i am quite sure i have a worn 5th synchro.

Also i need to get my pads re machined, who would be best to see for that? heard good things about Borgs brakes and front end but never got anything done with them.

thanks

That's nice, i like that red Jono.

Nice work ben, just out of curiosity who would be best to see about gearbox issues? i am quite sure i have a worn 5th synchro.

Also i need to get my pads re machined, who would be best to see for that? heard good things about Borgs brakes and front end but never got anything done with them.

thanks

I do all my own gearbox work man so i cant really recommend anyone.

Do you mean your rotors need machining?

Have you looked how much new ones are? I got DBA rotors for mine for a bit over $400 for all 4. AFM pads are pretty good as well

Had a bit of a look around yeah, mine have plenty of life left so i just wanted to get the faces machined because they are a little lumpy and you can see lines on the face.

Just like to thank Jono again for hooking me up with Leon, took my V35 to him today to get my comp rod bushes replaced and he did a great job. So good to not hear that horrible clunking noise anymore after putting up with it for 5 months, that's how long it takes to find someone in Mackay!

i'd love to do my mown work just sucks that i dont have a shed or the gear to do most of the work, plus little knowledge is a factor haha. I'm not sure what i'd like to do maybe, forge the engine, get a new ecu and fuel management, larger turbo. i'd probably be happy with that haha.

I don't think there's any businesses in town that have the equipment to do a good tune but there's blokes with awesome setups in their home garage.. eg Leon. Has a hoist and everything and very knowledgable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...