Jump to content
SAU Community

Recommended Posts

Dan, you should most definitely fit one of these to something

http://www.bulletpro...ford%206.0l.htm

http://performancetruckproducts.com/772441-5001s-garrett-powermax-turbo-04-07-6-0l

and change the rear housing to be something decent at same time.... as Variable Nozzle Tech..............

Edited by Force Fed

Callan / Elite Racing

When I cc'd my R33 RB25 head I got 62ccs (It was shaved 20 thou)

Is your head a R34 Neo Head Callan? I think I read somewhere on this forum that the R34 Neos are around the 50cc mark?

Anyone able to shed some light on this? Having an issue with my new power FC looking as though it is cutting to the idle map during gear changes and then taking 2 secs or so to realise I'm at WOT.

Red Circle is a gear change where it looks like its going back to closed loop idle map then jumps up to normal timing.

Blue Circle is normal, no timing drop and doing what it should be doing

White Circle is another gear change where it is dropping timing then jumping up

TimingEdit.jpg

Thought it was worth a try in here as well. TPS is at 0.45v closed and 4.15v at WOT

Anyone ever had experience with Boost Motorsport? I've been told they used to do a lot of work on imports when they first opened and are good. Might get them to do my gearbox change for me in a month if they get repped decent..

Anyone ever had experience with Boost Motorsport? I've been told they used to do a lot of work on imports when they first opened and are good. Might get them to do my gearbox change for me in a month if they get repped decent..

Can't Leon do it?

There used to be all this rage about Boost Motorsport, but I never actually heard anything good or bad, or now that I think about it anything about any work they did. I didn't think they were in existance anymore

Can't Leon do it?

There used to be all this rage about Boost Motorsport, but I never actually heard anything good or bad, or now that I think about it anything about any work they did. I didn't think they were in existance anymore

Not sure haven't asked him yet, don't know if he'd be up for it. Already been told don't go near them aha..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...