Jump to content
SAU Community

Recommended Posts

Crank should be getting balanced over the next few days. So I can finally start putting shit together :)

Got over the idea of cc-ing it. The shape of the piston domes and how it all sits just makes it more trouble then its worth. I already know its going to be between 8.5 - 9:1 so that's all good.

Get it all together and work out what colours I'm gonna paint everything. Sick of looking at the block how it is at the moment. Will look much nicer with some paint on it :)

Haha i have a couple of flat brim hats in the cardboard, the car will be dual purpose Rob just a matter of swapping tires and geometry, just wanna build something crazy and over the top, all my ideas i've wanted to do over the years put into one car.

Big f**k off GT Wing check! Low as f**k check! Massive deep dish wheels check! Sidepipe Titanium Exhaust check! V-mount intercooler/radiator check! Fully stripped out no dash and one seat check! Front splitter and Canards that would decapitate someone Fark yeah check!

Drive it like i stole it and hang the hell on, if it doesn't scare the shit out of me every time i drive it, white knuckling the bastard the whole lap and my arsehole chewing on that Bride seat then i'm afraid i have failed this project lol.

Haha that's brilliant, if you had a passenger seat i would of said you should get one of those dash stickers that say "SHUT THE f**k UP I GOT THIS!"

WTF are they doing with your engine Rob hand build they parts with a hacksaw and file, ring them slack kents up and put some fire under there arse, have you already payed them in full yet?

Haha that's brilliant, if you had a passenger seat i would of said you should get one of those dash stickers that say "SHUT THE f**k UP I GOT THIS!"

Haha yeah if freaking love that sticker should put one on the R32 lol

f**k that man you have paid in full it should be ready, i would have paid half now and half when i get it, that's ridiculous man who is doing the build. Does not take that long to build an engine, our Drag engine didn't even take that long, and it has custom built internals and we never paid the full bill until we went down and picked it up.

I don't mind to be honest... I know where it is and shit. JHH Racing is doing it. I trust him and he knows what he is doing. It is because of communication issues that its taking so long.

Shoulda done a JSA before I sent it down and made sure POS.comm was a control...

WTF are they doing with your engine Rob hand build they parts with a hacksaw and file, ring them slack kents up and put some fire under there arse, have you already payed them in full yet?

I hardly think anyone can call Will from JHH Perf. Engineering 'slack'.... Especially not when he builds most SEQ workshop motors, including Godzilla's..... One of the very few he doesnt is Elite's!

He currently has 8-10 motors sitting there..... I sort of doubt Rob's or mine are on the 'ultra urgent' list.....

Edited by Force Fed

What i'm getting at is if you generally have already paid something in full you shouldn't have to wait a lifetime to get it. E.g when you order a custom set of rims from Rays that take 3-4 months to be made you usually pay halve up front and the other halve when its ready to be shipped etc.

I know where you are coming from, Ben, but I also understand Will's side too. Total sercurity into the work

nothing worse than ordering $$$$$$ parts and the the guy disappears, only paying enough to cover half.

The only reason I was getting the shits is because I didn't know what the go was with it. Now I do, I have restored faith.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...