Jump to content
SAU Community

Recommended Posts

I don't usually like giving my 2 cents but here it is anyway....

If you pay to get a job done and there is a problem.....forget about the original estimated completion time. Like Rob said, he wasn't contactable for quite a while so basically Will would have needed to move on with other jobs to keep the cash flow rolling. He would also have other deadlines to meet and people to keep happy. Once you blow out the allocated time, it starts overlapping your next job and the next and the next. Pretty soon you have too much to handle....like me :)

There comes a point in time where you need to stop answering the phone, stop booking in work and just get them done and then start from scratch again. At the end of the day, you have one of the best engine builders in the industry doing the job, it wasn't his fault Rob wasn't contactable for that period of time and Rob understands this. He is happy to wait longer to make sure the job isn't rushed.

As for money up front. f**k carrying all the burden for parts costs until the job is done. We've got 28 cars in the shop at the moment, if each one owed me only $2k in parts........?

Well said mate!!! pretty sure the nail just got smashed on the head well and truly!!

PS. still laughing to myself about your tall thin bucket of icecream

Edited by Force Fed

And that's a perfect example of why i decided not to go into business full time in the auto motive performance industry to many shady people around trying to rip you off, never pay up etc, My lil workshop is just a Hobby like those small workshop in Japan, don't build many cars, but when they do, they are freaking awesome Quality over Quantity. But yeah 28 cars on the go f**k that's gotta be one big headache :woot: .

10 of 'em are Sean's but still, I'm on my own haha. I'm kinda the same as that too Ben. I spend more time than I charge in most cases because I like to make sure it's perfect. The only time I haven't been happy with work going out was when I had employees so now I'm solo again.

If you want something done right you gotta do it yourself. I'm just glad my customers don't live by that motto :D

Haha yeah true true gotta do it yourself to do it perfect and than you only got yourself to blame when something f**ks up. Always yelling at myself lol...joking I yell at my brother he breaks everything.

Only reason I didn't go to Elite is because I knew I was going to be away. A lot. So I went through a middleman to look after it and he uses JHH. No offense given to you, Dan. I've only heard great things about you.

Only reason I didn't go to Elite is because I knew I was going to be away. A lot. So I went through a middleman to look after it and he uses JHH. No offense given to you, Dan. I've only heard great things about you.

None taken mate. I was/am probably too busy to do it anyway. The only thing that matters in my book, is that you get a decent job. It's the only reason I even started the business. Too many people getting ripped off and I felt I had to do something about it

None taken mate. I was/am probably too busy to do it anyway. The only thing that matters in my book, is that you get a decent job. It's the only reason I even started the business. Too many people getting ripped off and I felt I had to do something about it

wonder woman over here :P

sooo i got me new plenum... 6mm now and good for 100+psi woot woo

let me know what ya think ppls

manifold.jpg

wonder woman over here :P

sooo i got me new plenum... 6mm now and good for 100+psi woot woo

let me know what ya think ppls

manifold.jpg

Looks like a giant alloy seagull flew over your house and took a dump on your engine

Hahaha jks mate looks good. Who made it?

How much boost do you plan on running? 6mm seems over kill. You running a 6mm thick intercooler as well? and 'cooler piping?

high 30 something psi maybe more see what happends.... plazmaman cooler and the piping will be stainless and thats a bit stronger then alloy. so its overkill everywhere

How much boost do you plan on running? 6mm seems over kill. You running a 6mm thick intercooler as well? and 'cooler piping?

The plenum has the highest load on it because of the pressure wave and potential backfires. There is a soft link between the piping and the plenum and that's called a silicon joiner. If you make everything so secure that it will not budge, you then a chance of your piping becoming the weak link.

Plenums usually come apart due to backfiring and heat/distortion/stresses rather than actual boost pressure. It's usually just that the guys running big boost are usually always running nitrous as well. A nitrous backfire will tear that shit right up. With 6mm plate, it's likely to either blow a silicon joiner instead or only pop it off the throttle body.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...